We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree push-fit elbow, 6 mm tube to 10 mm male thread

Legris

Legris 3699 06 60 trap 6 mm 10 mm 90° elbow

SKU CH-D8G6-CD230 MPN 3699

Nickel-plated brass 90° push-fit elbow joins 6 mm tube to 10 mm male thread, rated to 435 psi and 302 °F

  • TypeDrain Components
  • MaterialHAWA
  • Nickel-plated brass resists corrosion for long service life
  • Push-to-connect 6 mm tube installs without tools
  • 10 mm male metric thread fits standard ports
  • 90° elbow routes tubing in tight spaces
  • Rated 435 psi and 302 °F for demanding systems

90° Push-Fit Elbow 6 mm to 10 mm

This nickel-plated brass elbow connects a 6 mm push-fit tube to a 10 mm male metric thread. The 90° bend allows tight routing in lubrication systems. Rated for 435 psi and 302 °F, it suits demanding fluid-transfer applications.

Suits compact lubrication circuits.

Builders working with 6 mm tubing and 10 mm metric ports will find the fitting matches their spec. Installations that require a straight coupler, a different thread standard or a tube size outside 6 mm should select another part.

6 mm tube OD to 10 mm male metric thread

The decisive specification is the combination of a 6 mm push-to-connect end and a 10 mm male metric end in a 90° elbow. Verify both diameters and the thread type before ordering.

Highlights

  • Nickel-plated brass resists corrosion for long service life
  • Push-to-connect 6 mm tube installs without tools
  • 10 mm male metric thread fits standard ports
  • 90° elbow routes tubing in tight spaces
  • Rated 435 psi and 302 °F for demanding systems

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3699 06 60

Questions about this item

What tube sizes does the 6 mm and 10 mm push-to-connect elbow accept?

The fitting connects a 6 mm outer-diameter tube on the push-to-connect side to a 10 mm male metric thread on the other side.

How much clearance does the 19 mm overall length need behind the panel?

The elbow measures 19 mm overall, so allow at least that depth behind the mounting surface for the body and tube insertion.

Does the brass elbow come with thread sealant already applied?

No, the specifications state that pre-applied thread sealant is not included, so you must apply your own sealant to the 10 mm male thread before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.