We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting 1/4 inch tube silver finish

Legris

Legris 3699 06 10 push-fit elbow fitting 1/4 in tube brass silver

SKU CH-CW9P-TM5T5

A brass push-fit elbow connects 6 mm tube to 1/8 in MBSPP, rated 435 psi at 302 °F

  • Push-fit elbow enables quick 1/4 in tube connections
  • Brass construction withstands 435 psi operating pressure
  • Rated for 302 °F maximum operating temperature
  • Compact 19 mm overall length fits tight spaces
  • Pre-applied thread sealant not included for flexible sealing

Legris 3699 06 10 elbow fitting

This Legris push-fit elbow connects a 6 mm tube to a 1/8 in MBSPP thread. The brass body is rated for 435 psi and 302 Degrees F. It suits lubrication lines and other fluid circuits where a compact right-angle joint is required.

Pressure and temperature limits

The fitting withstands a maximum operating pressure of 435 psi and a maximum temperature of 302 Degrees F. Exceeding either limit can cause leakage or fitting failure. The push-to-connect seal relies on the tube tolerances and the thread engagement staying within these boundaries.

Installation notes

Push the 6 mm tube into the push-to-connect side until it seats fully; no tools are needed for that end. The 1/8 in MBSPP thread must be tightened with a spanner, and the joint should be checked for weeps before the system is pressurised. Misaligned tube cuts or damaged threads are the most common causes of leaks.

Highlights

  • Push-fit elbow enables quick 1/4 in tube connections
  • Brass construction withstands 435 psi operating pressure
  • Rated for 302 °F maximum operating temperature
  • Compact 19 mm overall length fits tight spaces
  • Pre-applied thread sealant not included for flexible sealing

Specifications

BrandLEGRIS

Questions about this item

Which tube size matches the 6 mm outer diameter on this fitting?

The push-to-connect side accepts 6 mm tube; the other end is a 1/8 in MBSPP thread, so choose this version when your line uses 6 mm tubing.

What does the 435 psi rating mean once the fitting is installed?

It is the maximum operating pressure the brass body and seal can handle at up to 302 °F; do not exceed it in the lubrication circuit.

How does the MBSPP thread on side B limit what I can connect?

Side B is a 1/8 in MBSPP parallel thread; it seals with a bonded washer or O-ring, not by thread taper, so the mating port must be a matching female parallel seat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.