We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting, silver finish, 1/2 inch tube and thread connections

Legris

Legris 3609 62 22 Push-Fit Elbow Fitting, 1/2 in Tube, Brass

SKU CH-YYE9-YHT6N MPN 3609

A push-fit brass elbow connects 1/2-inch tube to 1/2-inch NPT threads, rated for 435 psi and 302 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • Push-fit elbow installs fast without tools
  • Brass body resists corrosion at 435 psi rating
  • Handles 302 °F for hot fluid lines
  • 1/2 in tube and MNPT ends connect directly
  • Pre-applied sealant not included — add your own

1/2 in Brass Push-Fit Elbow

The Legris 3609 62 22 is a push-to-connect elbow fitting built from brass for lubrication lines. It joins 1/2 in tubing on one end to a 1/2 in male NPT thread on the other. The fitting carries a 435 psi pressure rating and a 302 Degrees F temperature limit. Overall length measures 1 1/8 in.

Installers needing a lubrication-ready elbow

Technicians assembling lubrication circuits with 1/2 in tube and matching NPT ports will find the connection direct. Systems that require a different tube diameter, a female thread, or a non-lubrication media should select another fitting. Buyers needing a straight connector or a tee configuration must choose a different part.

435 psi maximum operating pressure

This pressure ceiling decides whether the elbow suits the circuit. Verify the system design pressure against 435 psi before specifying the fitting. The 302 Degrees F temperature ceiling is the second limit to confirm. No other specification governs basic fitment.

Highlights

  • Push-fit elbow installs fast without tools
  • Brass body resists corrosion at 435 psi rating
  • Handles 302 °F for hot fluid lines
  • 1/2 in tube and MNPT ends connect directly
  • Pre-applied sealant not included — add your own

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3609 62 22

Questions about this item

How do I confirm the Legris 3609 62 22 elbow is sealed correctly after installation?

Pressurise the system up to the 435 psi maximum operating pressure and inspect the push-to-connect and MNPT joints for leaks; the brass body and pre-applied thread sealant should hold without weeping.

What comes with the 3609 62 22 fitting and what must I supply?

The box contains the brass push-fit elbow with 1/2 in tube OD and 1/2 in MNPT ends; you must provide the 1/2 in tubing, any additional thread sealant beyond the pre-applied coating, and installation tools.

Which Legris 3609 variant should I choose for a 1/2 in lubrication line?

Select the 3609 62 22 model; it matches a 1/2 in tube outer diameter and 1/2 in MNPT thread, rated for 435 psi and 302 Degrees F in lubrication applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.