We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass push-fit elbow fitting with 8mm tube connection and 3/8 inch thread, silver finish

Legris

Legris 3609 08 17 Push-Fit Elbow Fitting 8mm Brass

SKU CH-VF41-E51TY MPN 3609

An 8 mm push-to-connect elbow joins tubing to a 3/8 inch MBSPT thread, rated for 435 psi and 302 °F with brass construction

  • TypeDrain Components
  • Push-fit elbow enables quick tube installation without tools
  • Brass construction resists corrosion in fluid systems
  • 8 mm tube outer diameter matches standard pneumatic lines
  • 3/8 in MBSPT thread connects to common port sizes
  • Rated to 435 psi and 302 °F for demanding applications

8 mm Push-Fit Elbow for Lubrication Lines

This Legris 3609 fitting connects 8 mm tubing to a 3/8 inch MBSPT port using a push-to-connect design. The brass body and pre-applied thread sealant simplify installation in lubrication circuits. Rated for 435 psi and 302 °F, it suits industrial and automotive fluid-transfer applications. It is sold new and restricted from sale in California.

Fits 8 mm Tube and 3/8 Inch MBSPT Ports

The push-to-connect end accepts 8 mm outer-diameter tubing without tools, while the threaded end seals into a 3/8 inch MBSPT female port. Brass construction resists corrosion and vibration in lubrication systems. The elbow geometry redirects flow in tight spaces where straight fittings cannot reach. No additional sealant is required on the threaded side.

Replaces Threaded or Compression Elbows

This fitting upgrades installations that previously used separate compression nuts or threaded elbows, cutting assembly time and leak paths. The jump is worth it when a compact 90-degree turn is needed at 435 psi and 302 °F. It is not suited for builders who need a straight connector, a different tube diameter, or a fitting without California Proposition 65 restrictions.

Highlights

  • Push-fit elbow enables quick tube installation without tools
  • Brass construction resists corrosion in fluid systems
  • 8 mm tube outer diameter matches standard pneumatic lines
  • 3/8 in MBSPT thread connects to common port sizes
  • Rated to 435 psi and 302 °F for demanding applications

Specifications

TypeDrain Components
BrandLegris
Model3609 08 17

Questions about this item

How much pressure can the brass elbow handle before it becomes the limiting factor under continuous operation?

The fitting is rated for a maximum operating pressure of 435 psi, which is the limit that will be reached first under sustained use.

How hot does the fitting get when fluid runs through it all day at the rated temperature?

The maximum operating temperature is 302 Degrees F, so the brass body will approach that temperature during continuous high-temperature flow.

What tube and thread sizes must already be on the installation for this 8 mm push-fit elbow to connect?

You need an 8 mm outer-diameter tube for the push-to-connect side and a 3/8 inch MBSPT threaded port for the other side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.