We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass swivel elbow fitting 6mm tube 1/4in thread

Legris

Legris 3609 06 13 Brass Swivel Elbow Trap 6mm 1/4in

SKU CH-D785-16F7H MPN 3609

Nickel-plated brass swivel elbow connects 6 mm tube to 1/4 in BSPT thread, rated 435 psi at 302 °F

  • TypeDrain Components
  • Swivel elbow enables flexible tubing routing in tight spaces
  • Push-to-connect design secures 6 mm tube without tools
  • Male BSPT 1/4 in thread connects directly to lubrication ports
  • Brass construction withstands 435 psi and 302 °F operating limits
  • Compact 21 mm length fits confined automotive installations

Lubrication Fitting for 6 mm Tubing

The Legris 3609 swivel elbow connects a 6 mm push-to-connect tube to a 1/4 inch male BSPT thread. It is built for lubrication circuits where a compact 90-degree turn is required. The nickel-plated brass body resists corrosion in workshop environments. New stock ships in original manufacturer packaging.

Brass Construction With Pre-Applied Sealant

The fitting body is machined from brass and finished in silver nickel plating. Male threads arrive with sealant already applied, so installation only needs hand tightening plus a spanner turn. The swivel nut allows the elbow to be oriented after the thread is seated without stressing the tubing. Overall length is 21 1/2 mm from end to end.

Pressure and Temperature Limits

Maximum operating pressure is rated at 435 psi and maximum temperature at 302 degrees F. Systems that exceed either value need a different fitting class. The push-to-connect side accepts only 6 mm outer-diameter tube; larger or smaller tubing will not seal. Buyers needing metric threads or a straight connector should select another model.

Highlights

  • Swivel elbow enables flexible tubing routing in tight spaces
  • Push-to-connect design secures 6 mm tube without tools
  • Male BSPT 1/4 in thread connects directly to lubrication ports
  • Brass construction withstands 435 psi and 302 °F operating limits
  • Compact 21 mm length fits confined automotive installations

Specifications

TypeDrain Components
BrandLegris
Model3609 06 13

Questions about this item

What thread standard does the 1/4 in MBSPT side use, and what pressure does it hold?

It uses a 1/4 in MBSPT thread and is rated for a maximum operating pressure of 435 psi.

What tube diameter and overall length does the push-fit side accept?

The push-fit side accepts a 6 mm tube outer diameter and the fitting has an overall length of 21 1/2 mm.

How is the swivel elbow installed, and what common step is missed?

Push the 6 mm tube firmly into the push-fit end until it seats, then thread the 1/4 in MBSPT end into the port; the step often missed is pushing the tube past the collet until it hits the internal stop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.