We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass push-fit tee fitting with three 3/8 inch connections

Legris

Legris 3604 60 00 Union Tee 3/8 in

SKU CH-60MJ-TV1GM MPN 3604

Nickel-plated brass push-fit tee connects three 3/8 in tubes for potable water, steam, oils and harsh detergents

  • TypeDrain Components
  • Push-to-connect design enables quick tool-free installation
  • Nickel-plated C36000 brass resists corrosion in harsh environments
  • Suitable for food processing, potable water and steam systems
  • Three 3/8 in ports allow flexible branching in plumbing layouts
  • Pre-applied thread sealant not required for push-fit connections

Push-to-connect tee for 3/8 in tubing

The Legris 3604 60 00 is a nickel-plated brass union tee designed for push-to-connect installation on 3/8 in outer-diameter tubing. All three ports use the same push-fit connection method, allowing quick assembly without tools or separate thread sealant. The C36000 brass body suits applications such as food processing, potable water, steam and exposure to harsh detergents or oils. It is supplied new and ready for use in compatible fluid-handling systems.

Suits simple three-way junctions.

This fitting suits installers who need a straight-forward tee to join or split three equal 3/8 in lines in a push-fit system. It does not suit installations that require threaded connections, different tube diameters on any port, or a fitting rated for pressures or temperatures outside the C36000 material scope. Buyers needing those configurations should look at alternative fitting types.

Three 3/8 in push-fit ports in C36000 brass

The single specification that decides fit is the triple 3/8 in push-to-connect port arrangement in C36000 nickel-plated brass. If the system uses 3/8 in tubing throughout and accepts push-fit joints, this tee matches; if any port must be a different size, threaded, or made from another alloy, this part will not work.

Highlights

  • Push-to-connect design enables quick tool-free installation
  • Nickel-plated C36000 brass resists corrosion in harsh environments
  • Suitable for food processing, potable water and steam systems
  • Three 3/8 in ports allow flexible branching in plumbing layouts
  • Pre-applied thread sealant not required for push-fit connections

Specifications

TypeDrain Components
BrandLegris
Model3604 60 00

Questions about this item

How do I install the 3/8 in push-fit tee and what step causes leaks?

Cut the tube square, deburr the edge, then push it fully into each port until the grab ring clicks; the step most often missed is failing to push past the first resistance so the collet does not lock.

What maintenance will the C36000 brass tee need over time?

Inspect the three 3/8 in connections periodically for seepage; if a joint weeps, release the tube with a release tool, trim a fresh square end, and re-insert — the brass body itself requires no lubrication or scheduled replacement.

What limit appears first when the tee runs continuously with steam or harsh detergents?

The C36000 brass and EPDM seals handle the rated temperature and chemical exposure, so the practical limit is tube creep — prolonged heat and pressure can cause the 3/8 in tubing to relax and loosen the grip, requiring re-seating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.