We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten black push-fit elbow fittings with 14mm tube and 1/2 BSPP thread

Legris

Legris 3199 14 21 Male Elbow 1/2 BSPP PK10

SKU CH-021J-FATCG MPN 3199

A pack of ten push-fit elbow fittings connecting 14 mm tube to 1/2 inch BSPP threads, rated to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds up installation
  • 14 mm tube fits standard pneumatic lines
  • 1/2 inch BSPP male thread ensures secure sealing
  • Fibre-reinforced nylon body withstands 290 psi pressure
  • Rated to 175 °F for demanding vacuum applications

Male Elbow Push-Fit Fitting

This Legris 3199 14 21 male elbow connects 14 mm tubing to a 1/2 inch BSPP thread using a push-to-connect design. It is made from fiberglass-reinforced nylon and rated for 290 psi at 175 degrees F. The fitting suits vacuum applications and comes in a pack of 10.

Suited for 14 mm tubing systems only

Installers joining 14 mm outer diameter tube to a 1/2 inch BSPP port will find this elbow matches both dimensions. It does not fit other tube sizes or thread standards, so buyers needing different diameters or connection types should look elsewhere.

14 mm push-to-connect to 1/2 inch BSPP

The critical specification is the Side A tube outer diameter of 14 mm paired with a Side B 1/2 inch BSPP male thread. If your system uses a different tube size or thread, this part will not connect.

Highlights

  • Push-to-connect design speeds up installation
  • 14 mm tube fits standard pneumatic lines
  • 1/2 inch BSPP male thread ensures secure sealing
  • Fibre-reinforced nylon body withstands 290 psi pressure
  • Rated to 175 °F for demanding vacuum applications

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 14 21

Questions about this item

What thread standard does the 1/2 BSPP side of the Legris 3199 14 21 use, and what pressure does it handle?

The male end uses a 1/2 inch BSPP thread and the fitting is rated for a maximum operating pressure of 290 psi.

What tube size and clearance does the push-fit end of this elbow require?

The push-fit side accepts a 14 mm outer-diameter tube; allow enough space for the elbow body and the tube insertion depth.

How is the Legris 3199 14 21 installed, and what common step is missed?

Push the 14 mm tube firmly into the push-fit port until it seats, then thread the 1/2 BSPP male end into the mating port; the step often missed is not pushing the tube past both collet and O-ring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.