We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting 10 mm to 3/8 inch BSPP

Legris

Legris 3199 10 17 10 mm 3/8 in 290 psi trap

SKU CH-0D34-JT3J3 MPN 3199

A push-fit elbow connects 10 mm tubing to a 3/8 in MBSPP thread at 290 psi

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation with 10 mm tube fit
  • MBSPP 3/8 in thread connects directly to existing ports
  • Fiberglass-reinforced nylon body resists impact and chemicals
  • Rated to 290 psi for demanding pneumatic systems
  • Withstands 175 °F for high-temperature fluid lines

Push-Fit Elbow for 10 mm Tubing

This push-fit elbow connects 10 mm outer-diameter tubing to a 3/8 in MBSPP port. The fiberglass-reinforced nylon body handles vacuum service and pressures up to 290 psi. It is suited for pneumatic or fluid circuits where a compact right-angle joint is required.

Replaces Threaded or Compression Elbows

The push-to-connect end removes the need for ferrules, wrenches or thread sealant on the tube side. The jump is worth it when installation speed matters or when vibration makes threaded joints prone to loosening. Not for buyers who need a straight-through coupler or a different tube diameter.

Quick Install with Push-to-Connect

Insert the tube until it seats; the internal collet grips automatically. The MBSPP end threads into the port by hand then snugs with a wrench. Common issues: tube not cut square or not pushed past both seals, and cross-threading the 3/8 in port if forced.

Highlights

  • Push-to-connect design speeds installation with 10 mm tube fit
  • MBSPP 3/8 in thread connects directly to existing ports
  • Fiberglass-reinforced nylon body resists impact and chemicals
  • Rated to 290 psi for demanding pneumatic systems
  • Withstands 175 °F for high-temperature fluid lines

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 10 17

Questions about this item

What tube outer diameter and thread size does the 3199 10 17 fitting accept?

The fitting accepts a 10 mm tube outer diameter on the push-to-connect side and a 3/8 in MBSPP thread on the other side.

How do you install the push-to-connect end, and what step is often missed?

Push the 10 mm tube firmly into the fitting until it seats against the internal stop; the common mistake is not pushing far enough to engage the collet.

What operating pressure and temperature limits should I monitor for replacement?

The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 Degrees F; replace it if those limits are exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.