We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting, 8mm tube to 1/4in BSPT thread, pack of 10

Legris

Legris 3199 08 13 Male Elbow 8mm OD 290 PSI PK10

SKU CH-PAS9-4KM3K MPN 3199

Pack of ten push-fit male elbows connect 8 mm tube to 1/4 inch BSPP thread at 290 psi

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect elbow installs in seconds with no tools
  • 8 mm tube OD fits standard pneumatic lines
  • ¼ in MBSPP thread connects directly to female ports
  • 290 psi rating handles high-pressure air and vacuum
  • Fibre-reinforced nylon body resists heat to 175 °F

8 mm Push-Fit Elbow for Vacuum Lines

This black fiberglass-reinforced nylon elbow connects 8 mm outer-diameter tubing to a 1/4 inch MBSPP port using push-to-connect on the tube side. The pack contains ten fittings ready for vacuum applications. No thread sealant is pre-applied on the MBSPP end.

Sustained Pressure and Temperature Limits

The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. These limits apply to continuous service rather than brief spikes, so system pressure and fluid temperature must stay within both values at all times.

Push-to-Connect and MBSPP Interface Constraints

The push-to-connect side seals on the 8 mm tube OD without tools, while the MBSPP side requires a compatible 1/4 inch parallel port and separate thread sealant. Builders needing a different tube size, thread form or built-in sealant must select another fitting.

Highlights

  • Push-to-connect elbow installs in seconds with no tools
  • 8 mm tube OD fits standard pneumatic lines
  • ¼ in MBSPP thread connects directly to female ports
  • 290 psi rating handles high-pressure air and vacuum
  • Fibre-reinforced nylon body resists heat to 175 °F

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 08 13

Questions about this item

Will the 290 psi rating hold up during continuous use without leaking?

The fitting is rated for a maximum operating pressure of 290 psi, so it will maintain its seal under normal continuous operation within that limit.

Do I need 8 mm outer-diameter tubing and a 1/4 in MBSPP port ready before installing this elbow?

Yes, side A accepts 8 mm push-to-connect tubing and side B threads into a 1/4 in MBSPP port, so both must be available.

Can I use this black fiberglass-reinforced nylon elbow with older metal piping that runs at 175 °F?

The material withstands up to 175 °F, so it will handle that temperature alongside existing metal pipework.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.