We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 mm push-fit male elbow fitting, fiberglass-reinforced nylon

Legris

Legris 3199 08 10 Male Elbow 8 mm OD 290 PSI

SKU CH-JJNV-M7FVX MPN 3199

Push-fit elbow joins 8 mm tube to 1/8 in male BSPP thread, rated to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit elbow installs in seconds with no tools required
  • 8 mm tube connection fits standard pneumatic lines
  • 1/8 in BSPP male thread seals directly into ports
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum applications

8 mm Push-Fit Elbow Fitting

This Legris 3199 08 10 fitting connects an 8 mm tube to a 1/8 inch male BSPP thread at a 90-degree angle. It is made from black fiberglass-reinforced nylon rated for 290 psi and 175 degrees Fahrenheit. The push-to-connect design allows tool-free assembly in vacuum or pressure lines. Supplied in a pack of ten pieces.

Suits pneumatic and vacuum systems

Installers who need a compact elbow for 8 mm outer diameter tubing on a 1/8 BSPP port will find this part matches the required thread and tube size. It is not suitable for applications exceeding the stated pressure or temperature limits. Buyers needing a different tube diameter, thread standard or straight configuration should select another fitting.

290 psi maximum operating pressure

The 290 psi rating is the decisive figure for system compatibility; verify that your circuit never exceeds this value. The 175 degrees Fahrenheit temperature ceiling must also be observed for the nylon body and seals. No thread sealant is included, so prepare the BSPP thread accordingly.

Highlights

  • Push-fit elbow installs in seconds with no tools required
  • 8 mm tube connection fits standard pneumatic lines
  • 1/8 in BSPP male thread seals directly into ports
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum applications

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 08 10

Questions about this item

How can I confirm the push-fit elbow is sealing correctly after installation?

Pressurise the line up to 290 psi and check the 8 mm push-to-connect joint and the 1/8 in MBSPP thread for leaks; the fiberglass-reinforced nylon body is rated to 175 °F.

What comes in the pack and what extra parts are needed?

The PK10 box contains ten black male elbow fittings; no thread sealant is pre-applied, so you must supply a compatible sealant for the MBSPP threads.

Which version should I choose for an 8 mm tube and 1/8 in BSPP port?

Model 3199 08 10 matches an 8 mm outer-diameter tube on the push-fit side and a 1/8 in MBSPP thread on the other.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.