We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting 6 mm tube to 12 mm male thread pack of 10

Legris

Legris 3199 06 67 Push-Fit Elbow 6 mm × 12 mm PK10

SKU CH-92VF-P0GE2 MPN 3199

A push-fit elbow connects 6 mm tubing to a 12 mm male thread, rated for 290 psi and 175 °F, supplied in a pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit design speeds installation on 6 mm tubing
  • Male 12 mm metric thread connects directly to ports
  • Fibre-reinforced nylon withstands 290 psi and 175 °F
  • Black finish resists UV and chemical exposure
  • Pack of 10 fittings covers multiple connection points

Push-Fit Elbow for Vacuum Lines

This Legris 3199 push-fit elbow connects a 6 mm tube to a 12 mm male metric port. It is built from black fiberglass-reinforced nylon and rated for 290 psi at up to 175 degrees Fahrenheit. The pack contains ten fittings for production or maintenance use. No thread sealant is pre-applied on the male end.

Pneumatic Installers Needing a 90-Degree Transition

Suits technicians routing vacuum lines in tight spaces where a right-angle joint is required. The push-to-connect side accepts 6 mm tubing without tools. Not for installers who need a straight coupling, a different tube diameter, or a female-threaded port. Also unsuitable for systems exceeding the stated pressure or temperature limits.

6 mm Tube to 12 mm Male Metric Connection

The critical specification is the combination of a 6 mm push-fit port and a 12 mm male metric thread in a single elbow body. This exact pairing determines whether the fitting matches the port and tubing in your circuit. Verify both dimensions before ordering.

Highlights

  • Push-fit design speeds installation on 6 mm tubing
  • Male 12 mm metric thread connects directly to ports
  • Fibre-reinforced nylon withstands 290 psi and 175 °F
  • Black finish resists UV and chemical exposure
  • Pack of 10 fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 06 67

Questions about this item

What tube size and thread size does the 6 mm push-fit side and 12 mm male side require?

The push-fit side accepts a 6 mm outer-diameter tube, and the male side has a 12 mm metric thread for the mating port.

How do you install the elbow, and what step is often missed?

Push the 6 mm tube firmly into the fitting until it seats; then thread the 12 mm male end into the port by hand before tightening with a wrench — skipping the hand-start step risks cross-threading.

When should the elbow be replaced, and what wear signs indicate it?

Replace the elbow if the push-fit grip no longer holds the 6 mm tube securely, if the 12 mm threads show damage, or if the black fiberglass-reinforced nylon body develops cracks or deformation after exposure near the 175 °F / 290 psi limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.