We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting, 6 mm tube to 1/8 in MBSPP thread

Legris

Legris 3199 06 10 Male Elbow 6mm OD 290 PSI Trap

SKU CH-855A-5A29N MPN 3199

A push-fit male elbow connects 6 mm tubing to a 1/8 in MBSPP thread at up to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialPlastic/Metal Combination
  • ColorBlack
  • Push-to-connect elbow joins 6 mm tube to 1/8 in MBSPP thread
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum systems
  • Black finish identifies the fitting in complex plumbing layouts
  • Pre-assembled pack of ten speeds up multi-point installations

Male Elbow 6 mm OD 290 PSI

The Legris 3199 06 10 is a push-fit elbow fitting with a 6 mm tube outer diameter on one side and a 1/8 inch MBSPP thread on the other. It suits pneumatic or vacuum lines that need a compact 90-degree turn in automotive or light industrial plumbing.

Check thread size and tube diameter

Verify that the mating port accepts a 1/8 inch MBSPP thread and that the tubing measures 6 mm outer diameter. The fitting body is fibre-glass reinforced nylon rated for 290 psi maximum operating pressure and 175 degrees F maximum operating temperature.

Sustained pressure and temperature holding

Under continuous load the reinforced nylon body maintains seal integrity up to the rated 290 psi and 175 degrees F without creep. The push-to-connect end grips the tube securely while the male thread seals against the port during extended duty cycles.

Highlights

  • Push-to-connect elbow joins 6 mm tube to 1/8 in MBSPP thread
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum systems
  • Black finish identifies the fitting in complex plumbing layouts
  • Pre-assembled pack of ten speeds up multi-point installations

Specifications

TypeDrain Components
MaterialPlastic/Metal Combination
ColorBlack
BrandLegris
Model3199 06 10

Questions about this item

What tube size and thread does the Legris 3199 06 10 elbow connect?

It joins a 6 mm push-fit tube to a 1/8 in MBSPP male thread, both included in the fitting.

How do I decide between the listed versions for this fitting?

The part number 3199 06 10 specifies a single 6 mm by 1/8 in configuration; choose it when that exact tube and thread combination is required.

What does the 290 psi rating mean when the elbow is installed?

The system pressure must not exceed 290 psi at up to 175 °F for reliable sealing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.