We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit tee fitting with two 10 mm tube ends and a threaded branch

Legris

Legris 3198 10 13 Push-Fit Tee Fitting 10mm

SKU CH-P0ZD-4SSD7 MPN 3198

Push-fit tee connects two 10 mm tubes and a 1/4 in MBSPP port in air, cutting-fluid or inert-gas lines

  • TypeDrain Components
  • ColorBlack
  • Push-fit design enables quick 10 mm tube connections
  • Tee configuration splits flow across three ports
  • Fiberglass-reinforced nylon resists chemicals and vibration
  • 1/4 in MBSPP thread integrates with standard fittings
  • Pre-applied sealant not included for custom sealing

Push-Fit Tee for 10 mm Tubing

The Legris 3198 10 13 is a push-fit tee fitting designed to connect two 10 mm outer diameter tubes to a 1/4 inch MBSPP threaded port. Its fiberglass-reinforced nylon body handles air, cutting fluids and inert gases in fluid-handling systems.

Fit for straight pneumatic branching

This suits installers joining two metric tubes to a single BSPP thread in pneumatic or coolant circuits. It does not suit applications requiring metal threads, higher pressure ratings than the material allows, or connections to tube sizes other than 10 mm.

Dual 10 mm push-to-connect ends

The defining specification is the two 10 mm push-to-connect ports paired with a 1/4 inch MBSPP thread. Verify that your tubing matches 10 mm OD and the receiving port accepts a 1/4 inch BSPP male thread before ordering.

Highlights

  • Push-fit design enables quick 10 mm tube connections
  • Tee configuration splits flow across three ports
  • Fiberglass-reinforced nylon resists chemicals and vibration
  • 1/4 in MBSPP thread integrates with standard fittings
  • Pre-applied sealant not included for custom sealing

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3198 10 13

Questions about this item

Will the fiberglass-reinforced nylon body need replacement after long exposure to cutting fluids?

The fitting is moulded from fiberglass-reinforced nylon, a material chosen for chemical resistance to air, cutting fluids and inert gases, so routine replacement is not expected under normal service.

What pressure or temperature limit will be reached first during continuous compressed-air use?

The supplier data does not publish a maximum working pressure or temperature rating for the 3198 10 13, so the practical limit must be confirmed from the manufacturer’s technical catalogue before sustained high-pressure air service.

Does the push-to-connect seal leak or whistle when the line runs all day?

The 10 mm push-to-connect ends on sides A and B use a collet and O-ring design that seals without tools; no noise or leakage is reported when the fitting is installed to the tube manufacturer’s insertion depth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.