We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit tee fitting with two 8 mm tube ends and a 1/8 in male thread end

Legris

Legris 3198 08 10 Male Branch Tee 8mm 1/8in trap

SKU CH-8DXV-DTDWA MPN 3198

Push-fit male branch tee connects two 8 mm tubes to a 1/8 in BSP thread for air, cutting fluid or inert gas lines

  • TypeDrain Components
  • ColorBlack
  • Push-fit connection speeds installation with no tools required
  • Connects 8 mm tube to 1/8 in BSPP thread for mixed systems
  • Fiberglass-reinforced nylon body resists corrosion and chemicals
  • Suitable for air, cutting fluids and inert gas lines
  • Black finish identifies the fitting in complex assemblies

Fitting Type and Application

This Legris 3198 08 10 is a male branch tee designed for push-fit connections in fluid and air lines. It joins two 8 mm tubes and a 1/8 inch male BSPP thread using fiberglass-reinforced nylon construction. The black fitting suits industrial pneumatic circuits, cutting fluid delivery and inert gas distribution.

Installers Needing This Branch Configuration

The tee serves technicians who must split flow from a threaded port into two 8 mm push-to-connect lines. It is not suited for systems requiring threaded connections on all three ports. Builders needing a straight coupling, an elbow or a different tube diameter should select an alternative fitting.

Connection Sizes and Thread Standard

The critical specification is the combination of two 8 mm push-to-connect ends and one 1/8 inch male BSPP thread. This exact port arrangement determines whether the tee matches the tubing and port layout of the installation.

Highlights

  • Push-fit connection speeds installation with no tools required
  • Connects 8 mm tube to 1/8 in BSPP thread for mixed systems
  • Fiberglass-reinforced nylon body resists corrosion and chemicals
  • Suitable for air, cutting fluids and inert gas lines
  • Black finish identifies the fitting in complex assemblies

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3198 08 10

Questions about this item

Will the 8 mm push-fit ends of this 3198 tee connect directly to my existing 8 mm nylon tubing?

Yes, both push-to-connect ports are sized for 8 mm tube outer diameter, so they accept standard 8 mm nylon or compatible tubing without adapters.

How can I verify the 1/8 in MBSPP branch is sealing correctly after installation?

Pressurise the air or fluid line and check the 1/8 in male BSPP thread for leaks; the pre-applied sealant on the threads should prevent seepage when tightened to the fitting body.

Does the pack of ten tees include any tube inserts, release tools or additional sealant?

The box contains only the ten black fiberglass-reinforced nylon branch tees; tube inserts, release tools and extra thread sealant are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.