We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic push-fit tee fitting with three ports for 6mm tubing

Legris

Legris 3193 06 10 Push-Fit Tee Fitting 6mm

SKU CH-RD8H-YES11 MPN 3193

Connects 6 mm tubes in a tee configuration for air, cutting fluids and inert gases

  • TypeDrain Components
  • ColorBlack
  • Push-fit design speeds installation on 6 mm tubing
  • Tee configuration splits flow across three connections
  • Side B accepts 1/8 in MBSPP thread for secure mounting
  • Black fiberglass-reinforced body resists corrosion in air or fluid systems
  • Ready for air, cutting fluids and inert gases

Push-Fit Tee for 6 mm Tubing

This Legris 3193 push-fit tee connects 6 mm tubing in fluid-handling systems. The black fitting accepts air, cutting fluids and inert gases. One port uses a 1/8 in MBSPP thread while the other two are push-to-connect for 6 mm tube. Pre-applied thread sealant is not included.

Suits simple branch connections

The tee suits installers who need a single branch from a threaded port to two push-fit lines. It does not suit systems that require pre-applied sealant on the threaded end. Builders needing different tube diameters or additional ports should look elsewhere.

6 mm push-to-connect with 1/8 in MBSPP branch

The defining specification is the combination of 6 mm push-to-connect ends and a 1/8 in MBSPP threaded branch. This exact interface match decides whether the fitting integrates with the existing piping.

Highlights

  • Push-fit design speeds installation on 6 mm tubing
  • Tee configuration splits flow across three connections
  • Side B accepts 1/8 in MBSPP thread for secure mounting
  • Black fiberglass-reinforced body resists corrosion in air or fluid systems
  • Ready for air, cutting fluids and inert gases

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3193 06 10

Questions about this item

What tube size does the 6 mm push-to-connect side accept?

The push-to-connect ports on this tee fitting accept 6 mm outer-diameter tubing for a secure, tool-free seal.

What thread size is the MBSPP branch on this tee?

The MBSPP branch features a 1/8 in pipe thread for connection to a matching female port.

How do I correctly install the push-fit ends without leaks?

Cut the tube square, deburr the edge, then push it fully into the fitting until it bottoms out against the internal stop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.