We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with tube stem connection, 4mm, pack of 10

Legris

Legris 3184 04 00 Extended Plug-In Elbow 4mm PK10 trap

SKU CH-8GXG-0DTTZ MPN 3184

Push-fit elbow connects 4 mm tubing at 290 psi and 176 °F, pack of ten

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit elbow connects 4 mm tube without tools
  • Fiberglass-reinforced nylon resists impact and chemical exposure
  • Rated to 290 psi for reliable pneumatic circuits
  • Withstands 176 °F operating temperature in demanding environments
  • Pack of ten fittings covers multiple installation points

Push-fit elbow for 4 mm air lines

The Legris 3184 04 00 is a black fiberglass-reinforced nylon elbow fitting designed for pneumatic circuits. It joins two 5/32 in (4 mm) tubes with a push-to-connect end and a tube-stem end. The compact body measures 1 9/32 in overall and withstands up to 290 psi at 176 °F. Supplied in a pack of ten for production or maintenance use.

Installers needing a 90° turn on 4 mm push-fit

Suits technicians who want a quick, tool-free corner on metric 4 mm or imperial 5/32 in airline without threading or sealant. Not for installers who require a threaded port, a bulkhead mount, a different tube diameter, or a fitting rated above 290 psi and 176 °F.

Dual 5/32 in push-to-connect and tube-stem ends

The defining specification is the combination of a push-to-connect inlet and a tube-stem outlet, both sized for 5/32 in outer diameter. This single geometry decides whether the elbow matches the tube and connection method on the machine.

Highlights

  • Push-fit elbow connects 4 mm tube without tools
  • Fiberglass-reinforced nylon resists impact and chemical exposure
  • Rated to 290 psi for reliable pneumatic circuits
  • Withstands 176 °F operating temperature in demanding environments
  • Pack of ten fittings covers multiple installation points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3184 04 00

Questions about this item

Does the 4 mm push-fit elbow need the O-ring lubricated or replaced after a period of service?

The fiberglass-reinforced nylon body and pre-lubricated seals are designed for the full 290 psi / 176 °F rating without routine O-ring maintenance.

What pressure or temperature ceiling will the 3184 fitting reach first during continuous compressed-air use?

The 290 psi maximum operating pressure is the lower limit compared with the 176 °F temperature ceiling, so pressure governs sustained operation.

How much heat does the black HAWA elbow dissipate when air flows at the 290 psi limit all day?

The fitting itself generates negligible heat; the 176 °F rating reflects the ambient fluid temperature the material can withstand continuously.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.