We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit elbow fitting 10mm tube size 39mm length

Legris

Legris 3182 10 00 Push-Fit Elbow Trap 10mm

SKU CH-57W4-VR3Q8 MPN 3182

A push-fit elbow trap connects 10 mm tubing at a 90-degree angle, rated for 290 psi and 176 °F

  • TypeDrain Components
  • ColorBlack
  • Push-fit connection speeds up installation on 10 mm tubing
  • Fibreglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for 176 °F maximum temperature in air systems
  • Compact 39 mm overall length fits tight routing spaces
  • Black finish identifies the fitting in mixed assemblies

Push-Fit Elbow Fitting 10 mm

The Legris 3182 10 00 is a push-fit elbow fitting designed for 10 mm tube outer diameter on both connection ends. It uses fiberglass-reinforced nylon construction with a push-to-connect side and a tube stem side. The black component suits pneumatic circuits requiring a 90-degree directional change.

Suits Installers Building Air Lines

This fitting suits technicians assembling compressed-air lines where a compact 39 mm elbow is needed and 290 psi operating pressure covers the system demand. It is not for installers needing threaded connections, higher temperature ratings above 176 degrees F, or larger tube diameters.

Quick Push-Fit Installation

Installation is completed by pushing the tube into the fitting until it seats, with no tools or separate sealant required because none is pre-applied. The main issue occurs if the tube is not cut square or inserted fully, which can cause leaks at the rated pressure.

Highlights

  • Push-fit connection speeds up installation on 10 mm tubing
  • Fibreglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for 176 °F maximum temperature in air systems
  • Compact 39 mm overall length fits tight routing spaces
  • Black finish identifies the fitting in mixed assemblies

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3182 10 00

Questions about this item

What tube size must I already have to connect the 10 mm push-fit ends?

You need 10 mm outer-diameter tubing on both sides; the fitting accepts 10 mm push-to-connect on one end and a 10 mm tube stem on the other.

Will the fiberglass-reinforced nylon body handle the same 290 psi pressure as my existing metal fittings?

Yes, the elbow is rated for a maximum operating pressure of 290 psi, matching typical metal push-fit components in compressed-air systems.

How can I confirm the joint is sealed after pushing the tubing in?

Pull gently on each tube; a secure connection will not release, and no air should escape at the 290 psi working pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.