We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit elbow fitting 4mm to 6mm tube ends

Legris

Legris 3182 04 06 Push-Fit Elbow Fitting 4mm 6mm

SKU CH-EAZ5-XQWYS MPN 3182

Connects 4 mm and 6 mm tubes at a right angle with push-fit ends in fiberglass-reinforced nylon rated to 290 psi and 176 °F

  • TypeDrain Components
  • ColorBlack
  • Push-to-connect 4 mm inlet enables tool-free installation
  • 6 mm tube stem outlet connects directly to larger line
  • Fiberglass-reinforced nylon body withstands 290 psi working pressure
  • Rated to 176 °F maximum operating temperature for hot-air lines
  • Compact 26 1/2 mm overall length suits confined routing

Fitting for 4 mm and 6 mm tubing

This push-fit elbow connects a 4 mm tube on one side to a 6 mm tube stem on the other. It suits pneumatic circuits that need a compact right-angle joint. The fiberglass-reinforced nylon body resists impact and vibration in workshop or mobile equipment use.

Check tube size and pressure rating

Verify that your lines use 4 mm and 6 mm outer diameters before ordering. Confirm the system never exceeds 290 psi or 176 Degrees F, as higher values are outside the rated range. The fitting has no pre-applied thread sealant, so prepare threads separately if the port requires sealing.

Pre-applied sealant not included

The package supplies only the elbow fitting itself. No sealant, clips or tools are bundled, so source compatible thread tape or paste for the installation port. The absence of extras keeps the component cost low for high-volume maintenance kits.

Highlights

  • Push-to-connect 4 mm inlet enables tool-free installation
  • 6 mm tube stem outlet connects directly to larger line
  • Fiberglass-reinforced nylon body withstands 290 psi working pressure
  • Rated to 176 °F maximum operating temperature for hot-air lines
  • Compact 26 1/2 mm overall length suits confined routing

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3182 04 06

Questions about this item

What comes with the Legris 3182 04 06 elbow fitting and do I need to buy thread sealant separately?

The fitting includes the push-fit elbow only. Pre-applied thread sealant is not included, so you must supply your own if the installation requires it.

How do I choose between the 4 mm and 6 mm tube sizes on this fitting?

This single fitting connects a 4 mm tube on the push-to-connect side to a 6 mm tube stem on the other side; select it when your circuit needs that exact transition.

Will the 290 psi rating hold in a workshop air line that sees pressure spikes?

The maximum operating pressure is 290 psi at up to 176 °F; ensure your system never exceeds either limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.