We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit adapter fitting, 16 mm tube, silver finish

Legris

Legris 3175 16 17 Push-Fit Adapter Fitting 16mm Brass

SKU CH-51PZ-TSSS8 MPN 3175

A 16 mm push-fit brass adapter with 3/8 in MBSPT thread, rated to 290 psi and 175 °F

  • TypeDrain Components
  • Push-to-connect design enables quick installation without tools
  • Brass C36000 construction resists corrosion in demanding environments
  • Pre-applied thread sealant eliminates separate sealing steps
  • Rated for 290 psi at 175 °F maximum operating conditions
  • Connects 16 mm tube to 3/8 in MBSPT vacuum lines

16 mm push-fit adapter for vacuum lines

This Legris 3175 16 17 fitting joins 16 mm tubing to a 3/8 in MBSPT port using a push-to-connect design. The brass body uses C36000 alloy and ships with pre-applied thread sealant on the tapered side. It is rated for 290 psi and 175 °F maximum operating conditions. The overall length is 32 1/2 mm and the finish is silver.

Replaces threaded compression joints on vacuum

The push-to-connect end removes the need for ferrules and wrenches during assembly or service. The jump is worth it when faster tube changes matter and the 290 psi and 175 °F ratings cover the application. The MBSPT side seals with the included sealant rather than tape.

Suits maintenance teams

Builders who need a different tube diameter or a straight thread should look elsewhere. The fitting is restricted by California Proposition 65 for listed chemicals. Buyers requiring a non-brass material or a higher pressure class must choose another product.

Highlights

  • Push-to-connect design enables quick installation without tools
  • Brass C36000 construction resists corrosion in demanding environments
  • Pre-applied thread sealant eliminates separate sealing steps
  • Rated for 290 psi at 175 °F maximum operating conditions
  • Connects 16 mm tube to 3/8 in MBSPT vacuum lines

Specifications

TypeDrain Components
BrandLegris
Model3175 16 17

Questions about this item

What tube outer diameter does the 16 mm push-to-connect side accept?

The push-to-connect side is sized for 16 mm tube outer diameter.

How do I install the MBSPT threaded end with the pre-applied sealant?

Screw the 3/8 in MBSPT end into the mating port; the pre-applied thread sealant seals as you tighten — do not add tape or paste, which is the common mistake.

When should I replace the brass fitting or its sealant?

Replace the fitting if the brass shows corrosion, threads are damaged, or the sealant no longer holds pressure up to 290 psi at 175 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.