We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass push-fit fittings, silver finish, 6 mm tube size

Legris

Legris 3175 06 14 Push-Fit Fitting 6mm 10 PK

SKU CH-4CFN-DKDDT MPN 3175

Push-fit brass fitting connects 6 mm tube to 1/4 in MNPT, rated 290 psi at 175 Degrees F, pack of 10

  • TypeDrain Components
  • Push-to-connect design speeds vacuum-line assembly
  • Brass C36000 body resists corrosion in harsh environments
  • Pre-applied thread sealant cuts installation time
  • 290 psi rating handles high-pressure vacuum systems
  • 175 °F max temperature suits demanding applications

Push-Fit Brass Fitting for 6 mm Tube

This pack contains ten push-fit fittings that join a 6 mm outer-diameter tube to a 1/4 in male NPT thread. Each fitting is machined from C36000 brass with a silver finish and arrives with thread sealant already applied to the tapered threads. The push-to-connect design lets installers make a secure joint without tools or separate sealant.

Sustained Pressure and Temperature Performance

The brass body and internal seals are rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. Under continuous service at these limits the fitting maintains its seal without the creep or loosening that can affect compression joints over time. The pre-applied sealant remains effective throughout the temperature range.

Interface Limits of Push-to-Connect and NPT

The push-to-connect end accepts only 6 mm tube; larger or smaller tubing will not seal. The 1/4 in male NPT thread requires a matching female port and cannot be used with straight-thread or metric ports. The overall length of 11/32 in restricts use to spaces that can accommodate this engagement depth.

Highlights

  • Push-to-connect design speeds vacuum-line assembly
  • Brass C36000 body resists corrosion in harsh environments
  • Pre-applied thread sealant cuts installation time
  • 290 psi rating handles high-pressure vacuum systems
  • 175 °F max temperature suits demanding applications

Specifications

TypeDrain Components
BrandLegris
Model3175 06 14

Questions about this item

Does the brass fitting heat up or draw power when it runs all day?

The brass fitting is a passive component with no electrical draw and does not generate heat under normal operation.

What thread size must my existing port have to accept the 1/4 in MNPT side?

The fitting requires a female 1/4 in NPT thread on the mating port for a proper seal.

Will the 6 mm push-to-connect end seal on older nylon tubing I already have?

Yes, the 6 mm push-to-connect end is designed for standard 6 mm outer-diameter tubing, including older nylon lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.