We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass push-fit fittings, silver finish, 6 mm tube size

Legris

Legris 3175 06 11 Push-Fit Fitting 6mm Brass 10 PK

SKU CH-S3X5-FBQZN MPN 3175

A pack of ten brass push-fit fittings for 6 mm tube with 1/8 in male NPT threads, rated to 290 psi and 175 °F

  • TypeDrain Components
  • Push-to-connect design speeds installation with 6 mm tube size
  • Brass C36000 body resists corrosion at 290 psi maximum pressure
  • Pre-applied thread sealant on 1/8 in MNPT side ensures leak-free seal
  • Rated to 175 °F for reliable vacuum and fluid service
  • Ten fittings per pack cover multiple connection points

6 mm push-fit fitting for vacuum lines

This pack contains ten brass push-to-connect fittings with a 6 mm tube outer diameter and a 1/8 in male pipe thread on the opposite side. They suit pneumatic or vacuum circuits where quick, tool-free assembly is required. The C36000 brass body includes pre-applied thread sealant for immediate sealing.

Rated to 290 psi and 175 °F in service

The fitting withstands a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. Brass construction resists corrosion in typical shop environments. No moving parts or seals beyond the collet and O-ring mean silent operation and negligible pressure drop.

Male thread seals without extra tape

The 1/8 in MNPT end carries pre-applied sealant, so installers can thread directly into a port without PTFE tape or paste. The push-to-connect side accepts 6 mm tubing and releases with a simple collet press. Ten pieces cover multiple connection points or provide spares for maintenance.

Highlights

  • Push-to-connect design speeds installation with 6 mm tube size
  • Brass C36000 body resists corrosion at 290 psi maximum pressure
  • Pre-applied thread sealant on 1/8 in MNPT side ensures leak-free seal
  • Rated to 175 °F for reliable vacuum and fluid service
  • Ten fittings per pack cover multiple connection points

Specifications

TypeDrain Components
BrandLegris
Model3175 06 11

Questions about this item

How do I install the 6 mm push-fit side and the 1/8 in MNPT thread, and what step is often missed?

Push the 6 mm tube straight in until it seats; for the 1/8 in MNPT side, tighten only until the pre-applied sealant engages — over-tightening strips the brass threads.

What maintenance or replacement will the brass C36000 fitting and its pre-applied sealant need later?

Inspect for dezincification or sealant breakdown after thermal cycles; replace the fitting if the 6 mm grip ring or threads show corrosion or leakage.

Which limit appears first during sustained use — the 290 psi pressure rating or the 175 °F temperature rating?

The 175 °F temperature limit is reached first in hot-fluid systems; exceeding it degrades the sealant and reduces the 290 psi pressure margin.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.