We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit adapter fitting, silver finish, pack of ten

Legris

Legris 3175 04 13 trap tube 5/32 pipe 1/4 PK10

SKU CH-MC5H-X4GV5 MPN 3175

Push-fit brass adapter joins 5/32 in tube to 1/4 in MBSPT thread, rated to 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • Push-to-connect design speeds installation with 5/32 tube and 1/4 pipe
  • Pre-applied thread sealant ensures leak-free MBSPT joints without extra tape
  • Brass C36000 body handles 290 psi and 175 °F for reliable vacuum service
  • Compact 1/4 in overall length fits tight automotive plumbing spaces
  • Pack of 10 fittings covers multiple connection points in one purchase

Push-Fit Adapter for Vacuum Lines

This push-fit adapter joins 5/32 inch tube to a 1/4 inch male BSPT thread. The brass body uses C36000 grade material and includes pre-applied thread sealant. Rated for 290 psi and 175 degrees F. Supplied as a pack of ten fittings.

Suits vacuum systems needing this exact tube

Builders working with different tube diameters or thread types must select another fitting. Applications exceeding the stated pressure or temperature limits require alternative components. Not intended for potable water or gas distribution.

5/32 inch tube to 1/4 inch MBSPT connection

The Side A push-to-connect port accepts 5/32 inch outer diameter tube. Side B provides a 1/4 inch male BSPT thread. This specific size pairing determines whether the adapter fits the intended vacuum circuit.

Highlights

  • Push-to-connect design speeds installation with 5/32 tube and 1/4 pipe
  • Pre-applied thread sealant ensures leak-free MBSPT joints without extra tape
  • Brass C36000 body handles 290 psi and 175 °F for reliable vacuum service
  • Compact 1/4 in overall length fits tight automotive plumbing spaces
  • Pack of 10 fittings covers multiple connection points in one purchase

Specifications

TypeDrain Components
BrandLegris
Model3175 04 13

Questions about this item

How do I install the 1/4 in MBSPT end and what is the common mistake?

Apply PTFE tape to the 1/4 in MBSPT threads, hand-tighten, then turn one to two full turns with a wrench; the common mistake is over-tightening and cracking the brass body.

What maintenance or replacement will the push-to-connect end need later?

Inspect the collet and internal O-ring annually; if the 5/32 in tube shows scoring or the fitting weeps at 290 psi, replace the fitting.

Which limit appears first during sustained use at the 175 Degrees F rating?

The pre-applied thread sealant on the 1/4 in MBSPT side degrades before the brass body, so re-seal or replace the fitting when leaks develop at temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.