We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit elbow fitting with pre-applied thread sealant

Legris

Legris 3109 62 22 Elbow Trap, 1/2 in Push-To-Connect x MNPT

SKU CH-22GK-1YJM6 MPN 3109

Push-fit elbow connects 1/2 in tube to 1/2 in MNPT with pre-applied sealant, rated 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect installation saves time with no tools required
  • Pre-applied thread sealant ensures leak-free MNPT connection
  • Fiberglass-reinforced nylon withstands 290 psi at 175 °F
  • Compact elbow design fits tight 1/2 in tube routing
  • Black HAWA material resists corrosion in vacuum applications

Push-Fit Elbow for 1/2 in Tube

This Legris 3109 62 22 fitting connects 1/2 in outer-diameter tubing to a 1/2 in male NPT thread using a push-to-connect design. The fiberglass-reinforced nylon body includes pre-applied thread sealant for a ready-to-install seal. It is rated for vacuum applications up to 290 psi and 175 Degrees F. The compact elbow changes flow direction in tight plumbing layouts.

Suited for quick-connect vacuum and pneumatic lines

Installers who need a tool-free, leak-tight joint on 1/2 in tubing will find this elbow convenient. It is not intended for systems that exceed the stated pressure or temperature limits. Builders requiring a different thread size, tube diameter, or metal construction should look at alternative fittings.

Maximum operating pressure 290 psi

The 290 psi ceiling is the critical figure that determines whether this elbow matches the system design. Verify that the circuit pressure stays at or below this value before specifying the part.

Highlights

  • Push-to-connect installation saves time with no tools required
  • Pre-applied thread sealant ensures leak-free MNPT connection
  • Fiberglass-reinforced nylon withstands 290 psi at 175 °F
  • Compact elbow design fits tight 1/2 in tube routing
  • Black HAWA material resists corrosion in vacuum applications

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 62 22

Questions about this item

Will the 1/2 in MNPT thread on the Legris 3109 62 22 fit my existing 1/2 in female port?

Yes, the Side B connection is a 1/2 in MNPT thread designed for standard 1/2 in female NPT ports, and it includes pre-applied thread sealant.

How do I install the push-to-connect side on 1/2 in tubing without leaks?

Cut the 1/2 in OD tubing square, deburr the edge, then push it firmly into the Side A fitting until it seats against the internal grip ring; no tools or clamps are required.

When should I replace the Legris 3109 62 22 elbow trap in a vacuum line?

Replace it if the fiberglass-reinforced nylon body shows cracking, the grip ring no longer holds the 1/2 in tube securely, or the pre-applied sealant on the MNPT threads is worn after reassembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.