We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit tee fitting with three 1/2 in connections

Legris

Legris 3108 62 22 Push-Fit Tee Fitting 1/2 in

SKU CH-5AAB-HMWJJ MPN 3108

Push-fit tee connects three 1/2 in lines for air, cutting fluids or inert gases with pre-applied thread sealant

  • TypeDrain Components
  • ColorBlack
  • Push-to-connect design speeds up air line assembly
  • Fiberglass-reinforced nylon handles cutting fluids and inert gases
  • Pre-applied thread sealant cuts installation time on the MNPT branch
  • Single 1/2 in tube size simplifies inventory for three-way connections
  • Black finish identifies the fitting in mixed-system environments

Push-Fit Tee Fitting for Air and Fluid Lines

The Legris 3108 62 22 connects three 1/2 inch lines in a tee configuration for air, cutting fluids and inert gases. One end uses a male NPT thread with pre-applied sealant while the other two accept push-to-connect tubing. Fiberglass-reinforced nylon construction handles industrial environments.

Verify Thread Compatibility and Media

Confirm that the 1/2 inch male NPT thread matches the female port on your equipment before ordering. Ensure the system pressure and temperature stay within the fitting’s rated range for air, cutting fluids or inert gases. The pre-applied thread sealant is single-use so plan for fresh sealant if the joint is broken and remade.

Fiberglass-Reinforced Nylon Body

The black fiberglass-reinforced nylon body resists corrosion and vibration in workshop settings. Two push-to-connect ports allow tube insertion without tools while the threaded port seals with the included compound. This combination reduces assembly time and simplifies future re-routing of 1/2 inch tubing.

Highlights

  • Push-to-connect design speeds up air line assembly
  • Fiberglass-reinforced nylon handles cutting fluids and inert gases
  • Pre-applied thread sealant cuts installation time on the MNPT branch
  • Single 1/2 in tube size simplifies inventory for three-way connections
  • Black finish identifies the fitting in mixed-system environments

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3108 62 22

Questions about this item

Does the Legris 3108 62 22 tee include any extra parts or tools for installation?

The fitting ships as a single push-fit tee with pre-applied thread sealant on the male NPT side; no additional clips, tubing or tools are supplied.

Should I choose the 3108 62 22 or a different model for 1/2 in tube and 1/2 in NPT?

The 3108 62 22 is the exact model for 1/2 in push-fit on both tube ends and a 1/2 in male NPT branch; other 3108 variants have different tube or thread sizes.

What does the 1/2 in push-fit rating mean when the tee is pressurised with air or cutting fluid?

It accepts 1/2 in outside-diameter tubing on the two push-fit ports and seals on a 1/2 in male NPT thread, rated for air, cutting fluids and inert gases in the fiberglass-reinforced nylon body.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.