We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit tee fitting with two 1/4 in tube ends and one threaded end

Legris

Legris 3108 56 11 Push-Fit Tee Trap 1/4 in

SKU CH-YXDF-YKAJ0 MPN 3108

Push-fit tee connects two 1/4 in tubes to a 1/8 in MNPT thread with pre-applied sealant

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit design enables quick tube connections without tools
  • Fiberglass-reinforced nylon body resists corrosion and chemical exposure
  • Pre-applied thread sealant on MNPT end prevents leaks
  • 1/4 in tube ports suit standard pneumatic and fluid lines
  • Black colour provides clear visual identification in assemblies

Push-Fit Tee Fitting for Air and Fluids

The Legris 3108 56 11 is a push-fit tee fitting designed for air, cutting fluids and inert gas lines. Its fiberglass-reinforced nylon body includes pre-applied thread sealant on the MNPT branch. The fitting connects two 1/4 in push-to-connect tubes to a 1/8 in male pipe thread.

Installers needing a compact branched connection

This tee suits technicians who want a tool-free push-to-connect joint on both tube ends with a sealed male thread on the third port. It is not for systems that require metal threads, welded joints or a different tube diameter.

1/4 in tube with 1/8 in MNPT branch

The critical specification is the combination of two 1/4 in push-to-connect ports and one 1/8 in MNPT port with pre-applied sealant. If your circuit uses a different tube size or thread standard, this fitting will not match.

Highlights

  • Push-fit design enables quick tube connections without tools
  • Fiberglass-reinforced nylon body resists corrosion and chemical exposure
  • Pre-applied thread sealant on MNPT end prevents leaks
  • 1/4 in tube ports suit standard pneumatic and fluid lines
  • Black colour provides clear visual identification in assemblies

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3108 56 11

Questions about this item

Will the 1/4 in push-to-connect ends or the 1/8 in MNPT thread need periodic re-sealing or replacement?

The pre-applied thread sealant on the MNPT side is single-use; re-sealing requires fresh tape or compound if the joint is broken. The push-to-connect ports rely on internal collets and O-rings that should be inspected for wear or contamination during routine system maintenance.

What pressure or temperature limit will be reached first during continuous air or cutting-fluid service?

The fiberglass-reinforced nylon body and HAWA material grade set the maximum operating envelope; sustained pressure or temperature beyond the manufacturer's rating for this fitting will cause creep or seal degradation before the metal thread yields.

Does the fitting transmit noticeable vibration noise or heat when air runs through it all day?

The nylon construction dampens pressure pulses, so vibration noise is minimal. Heat transfer from compressed air is low; the fitting body remains near ambient temperature during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.