We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit tee fitting with 10mm tube ends and 1/4 NPT branch

Legris

Legris 3108 10 14 Push-Fit Tee Fitting 10mm

SKU CH-7Y40-EZ22B MPN 3108

A push-fit tee connects two 10 mm tubes to a 1/4 in male thread with pre-applied sealant

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit design enables quick 10 mm tube connections without tools
  • Pre-applied thread sealant on 1/4 in MNPT branch cuts assembly time
  • Fiberglass-reinforced nylon body resists cutting fluids and inert gases
  • Black color coding simplifies line identification in pneumatic systems
  • Legris 3108 model ensures consistent quality for air and fluid circuits

10mm Push-Fit Tee with 1/4 NPT Branch

The Legris 3108 10 14 fitting connects two 10mm tubes and a 1/4 inch male NPT thread in a tee configuration. Its fiberglass-reinforced nylon body handles air, cutting fluids and inert gases. A pre-applied thread sealant on the NPT end speeds installation and helps prevent leaks.

Suits pneumatic and fluid circuits needing a 10mm

This part is for builders joining metric tubing to a 1/4 inch port. It is not for systems requiring all three ports to be push-to-connect, nor for applications that need a different tube diameter or thread size. Buyers needing stainless steel or brass construction should look elsewhere.

Branch port is 1/4 inch male NPT with sealant

The third leg uses a tapered pipe thread instead of a push-fit connection, and it arrives with sealant already applied. This single detail decides whether the fitting matches your port and sealing requirements. Verify the thread standard and 10mm tube size before ordering.

Highlights

  • Push-fit design enables quick 10 mm tube connections without tools
  • Pre-applied thread sealant on 1/4 in MNPT branch cuts assembly time
  • Fiberglass-reinforced nylon body resists cutting fluids and inert gases
  • Black color coding simplifies line identification in pneumatic systems
  • Legris 3108 model ensures consistent quality for air and fluid circuits

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3108 10 14

Questions about this item

How can I verify the 3108 10 14 tee is sealing properly after connecting 10 mm tubing to both push-to-connect ends?

Press each 10 mm tube firmly into its port until it seats, then pressurise the air or cutting-fluid line and check for bubbles or pressure drop at the two push-to-connect joints and the 1/4 in MNPT thread.

What does the Legris 3108 10 14 package contain and what extra items are needed?

The box holds the single fiberglass-reinforced nylon tee with pre-applied thread sealant on the 1/4 in MNPT leg; you must supply two 10 mm tubes and a 1/4 in NPT female port or adapter.

Which version of the 3108 10 14 should I select for a 10 mm tube system with a 1/4 in male thread?

Choose the 3108 10 14 model — it matches 10 mm outer-diameter tubing on both push-to-connect branches and a 1/4 in MNPT branch for air, cutting fluids or inert gases.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.