We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit tee with two 5/16 inch tube ends and one 1/8 NPT male thread, pack of 10

Legris

Legris 3108 08 11 Male Branch Tee 1/8 NPT PK10

SKU CH-RXP4-V3F19 MPN 3108

Push-fit male branch tee connects two 5/16 in tubes to a 1/8 NPT thread with pre-applied sealant, supplied as a pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect ends speed up air-line assembly
  • Pre-applied thread sealant cuts installation time
  • Fiberglass-reinforced nylon resists cutting fluids and inert gases
  • 1/8 NPT male branch fits standard ports
  • Pack of ten keeps spares on hand

Push-Fit Tee Fitting

This push-fit tee fitting connects two 5/16 inch tubes and one 1/8 inch male NPT thread. It handles air, cutting fluids and inert gases in industrial pneumatic circuits. The fiberglass-reinforced nylon body includes pre-applied thread sealant on the tapered thread. Supplied as a pack of 10 pieces.

Suitable applications and limits

Suits technicians building or repairing compressed-air lines that use 5/16 inch push-to-connect tubing and require a branched connection to a 1/8 NPT port. Not for installers who need a different tube diameter, a different thread standard, or a fitting rated for fluids outside the listed media.

Branch connection specification

The defining specification is the 1/8 inch male NPT thread on the branch leg combined with 5/16 inch push-to-connect ends on the two run legs. Match this exact combination to your tubing and port requirements before ordering.

Highlights

  • Push-to-connect ends speed up air-line assembly
  • Pre-applied thread sealant cuts installation time
  • Fiberglass-reinforced nylon resists cutting fluids and inert gases
  • 1/8 NPT male branch fits standard ports
  • Pack of ten keeps spares on hand

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3108 08 11

Questions about this item

How do I install the Legris 3108 push-fit tee and what step is often missed?

Push the 5/16 in tubes firmly into sides A and B until they seat, then tighten the 1/8 NPT male thread on side C; the pre-applied sealant means you must not add extra tape or paste.

What maintenance or replacement will the 3108 08 11 fitting need over time?

Inspect the fiberglass-reinforced nylon body and tube seals periodically for cracks or leaks; replace the fitting if the push-to-connect grip rings lose retention or the threads show damage.

What limit appears first when the Legris tee runs continuously with air or cutting fluids?

The fiberglass-reinforced nylon material and pre-applied sealant set the pressure and temperature ceiling; sustained operation beyond those ratings will cause seal degradation or body distortion first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.