We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit tee fitting with three ports

Legris

Legris 3108 08 10 Push-Fit Tee Fitting 8mm

SKU CH-4CRV-REDVE MPN 3108

Push-fit tee connects two 8 mm tubes to a 1/8 in male BSPT thread with pre-applied sealant

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design enables tool-free installation on 8 mm tubing
  • Tee configuration splits flow across three ports for versatile routing
  • Fiberglass-reinforced nylon body resists corrosion and mechanical stress
  • Pre-applied thread sealant on the 1/8 in MBSPT port prevents leaks
  • Suitable for air, cutting fluids and inert gases in industrial systems

Application and Use

The Legris 3108 08 10 is a push-fit tee fitting designed for 8mm tube connections in fluid-handling systems. It suits pneumatic circuits, cutting-fluid lines and inert-gas distribution where quick assembly without tools is required. The fiberglass-reinforced nylon body and pre-applied thread sealant on the 1/8 in MBSPT branch provide a secure, leak-resistant joint. Black colour coding helps identify the line at a glance.

Who It Suits and Who It Does Not

Maintenance engineers and machine builders who need a compact three-way junction for 8mm tubing will find this fitting matches their tube size and thread requirement. It is not intended for installers who require a straight coupling, an elbow or a different branch thread form. Buyers working with larger bore tube or metal-only specifications should select an alternative part.

Deciding Specification

The critical parameter is the 8mm tube outer diameter on the two push-to-connect ends combined with a 1/8 in MBSPT threaded branch. If your system uses 8mm tube and needs a tee with that exact thread size, this fitting meets the requirement. A different tube diameter or thread standard means this part will not fit.

Highlights

  • Push-to-connect design enables tool-free installation on 8 mm tubing
  • Tee configuration splits flow across three ports for versatile routing
  • Fiberglass-reinforced nylon body resists corrosion and mechanical stress
  • Pre-applied thread sealant on the 1/8 in MBSPT port prevents leaks
  • Suitable for air, cutting fluids and inert gases in industrial systems

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3108 08 10

Questions about this item

How do I install the Legris 3108 08 10 push-fit tee and what is the common mistake?

Push the 8 mm tube firmly into each push-to-connect port until it seats; the frequent error is stopping at the first resistance instead of pushing past the grip ring to the tube stop.

What maintenance or replacement will this fiberglass-reinforced nylon tee need over time?

Inspect the pre-applied thread sealant on the 1/8 in MBSPT branch for weeping after thermal cycles; replace the fitting if the nylon body shows cracking or the grip rings lose holding force.

What is the first limit that appears when this tee runs air or cutting fluid continuously?

The fiberglass-reinforced nylon body and push-to-connect seals set the practical temperature and pressure ceiling; sustained heat or pressure beyond the material rating will cause leakage or deformation first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.