We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit union tee with three tube connections in a T shape

Legris

Legris 3104 Union Tee 5/32 x 1/4 in PK10

SKU CH-684M-Z3YKV MPN 3104

Push-fit tee connects 5/32 in and 1/4 in tubing with brass and fiberglass-reinforced nylon body in black, supplied in a pack of ten

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation
  • Three-port tee splits air lines efficiently
  • Mixed 5/32 in and 1/4 in ports fit varied tubing
  • Brass and reinforced nylon body resists corrosion
  • Pack of ten fittings covers multiple connection points

Push-Fit Tee Fitting

This push-fit tee fitting connects three pneumatic tubes in a T configuration. Two branches accept 5/32 inch outer-diameter tubing and the third branch accepts 1/4 inch outer-diameter tubing. The body is made from brass and fibre-glass reinforced nylon with a black finish. It is supplied as a pack of ten pieces.

Installers needing mixed tube sizes

Technicians who must join 5/32 inch and 1/4 inch tubing in air systems will find this fitting suitable. Users requiring all three ports at the same diameter or needing threaded connections should consider other options.

Mixed 5/32 and 1/4 inch port diameters

The fitting provides two 5/32 inch push-to-connect ports and one 1/4 inch push-to-connect port. This specific combination determines whether the part matches the tube sizes in your pneumatic circuit.

Highlights

  • Push-to-connect design speeds installation
  • Three-port tee splits air lines efficiently
  • Mixed 5/32 in and 1/4 in ports fit varied tubing
  • Brass and reinforced nylon body resists corrosion
  • Pack of ten fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3104 04 56

Questions about this item

How do I install the 5/32 and 1/4 in push-to-connect tubes, and what step is often missed?

Push each tube fully into its port until it seats against the internal stop; the common mistake is stopping at the first resistance instead of pushing past the collet teeth to the second, firm stop.

What maintenance or replacement will the brass and fiberglass-reinforced nylon body need later?

Inspect the collet grips and O-rings annually; replace the fitting if the collet no longer holds the tube securely or if the nylon shows cracking from UV or chemical exposure.

What limit appears first under sustained air pressure at 5/32 and 1/4 in connections?

The nylon body's pressure rating at operating temperature is reached before the brass threads or collets yield, so sustained pressure near the upper rating will cause creep in the nylon first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.