We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black brass push-fit tee fitting with 3/8 inch and 1/4 inch tube connections

Legris

Legris 3104 60 56 Push-Fit Tee Fitting

SKU CH-WS7J-XPTZ6 MPN 3104

Push-fit brass tee joins 3/8 in and 1/4 in tubing with tool-free connections

  • TypeDrain Components
  • ColorBlack
  • Quick push-fit assembly saves installation time
  • Brass body resists corrosion in air-line systems
  • Mixed 3/8 in and 1/4 in ports suit varied tube sizes
  • All three sides push-to-connect for simple routing
  • Black finish aids identification in pneumatic circuits

Brass Push-Fit Tee Fitting

The Legris 3104 60 56 is a brass push-fit tee fitting designed for air applications. It connects three tubes using a tool-free push-to-connect mechanism on every port. The body combines brass with fibre-glass-reinforced nylon for strength and corrosion resistance. No thread sealant is included or pre-applied.

Tube sizes 3/8 in and 1/4 in

This fitting suits pneumatic systems where one 3/8 in line branches to a 1/4 in line or joins two 3/8 in lines. It is not for installers who need threaded connections, solvent-weld joints or a different tube diameter combination. Buyers working with hydraulic fluid or potable water should verify chemical compatibility before purchase.

Mixed 3/8 in and 1/4 in ports

The decisive specification is the port layout: side A and side C accept 3/8 in outer-diameter tube while side B accepts 1/4 in outer-diameter tube. All three ports use push-to-connect ends. Confirm that this exact size arrangement matches the circuit diagram before ordering.

Highlights

  • Quick push-fit assembly saves installation time
  • Brass body resists corrosion in air-line systems
  • Mixed 3/8 in and 1/4 in ports suit varied tube sizes
  • All three sides push-to-connect for simple routing
  • Black finish aids identification in pneumatic circuits

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3104 60 56

Questions about this item

Does the brass body or the push-to-connect seals on the 3104 60 56 need periodic replacement?

The brass construction and nylon components are designed for long service; only the internal O-ring seals may require replacement if they degrade from fluid exposure or age.

What is the first limitation when the 3104 60 56 tee runs continuously under pressure?

The push-to-connect grip on the 3/8 in and 1/4 in tube ends will reach its holding limit before the brass body yields under sustained pressure.

How much heat or noise does the 3104 60 56 generate during all-day operation?

As a passive brass and nylon fitting it produces no noise and negligible heat; only the conveyed fluid temperature affects the fitting surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.