We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon push-fit tee fitting with three 3/8 inch connections

Legris

Legris 3104 60 00 Union Tee 3/8" Nylon PK10

SKU CH-E4AE-6MRDC MPN 3104

Push-fit union tee connects three 3/8-inch tubes in air lines, supplied as a pack of ten black nylon fittings

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Quick push-to-connect assembly speeds up installation
  • Three 3/8 in ports join lines in a single tee
  • Brass and glass-filled nylon body resists corrosion
  • Pack of ten fittings covers multiple connection points
  • Black colour matches standard pneumatic tubing systems

3/8" Push-Fit Union Tee

The Legris 3104 60 00 is a push-fit tee fitting designed for air applications. It connects three sections of 3/8 inch outer diameter tubing using push-to-connect ports on all three ends. The body is constructed from brass and fiberglass-reinforced nylon in a black finish. Supplied as a pack of 10 pieces for plumbing or pneumatic installations.

Tool-Free Installation

Each of the three ports uses a push-to-connect design that grips the tube without tools or separate clamps. Simply push cleanly cut tubing into the port until it seats fully. Leaks usually come from oval or damaged tube ends, so cut squarely with a proper tube cutter. No thread sealant is included or required for the push-fit connections themselves.

Check Tubing Compatibility

Verify that your existing tubing has a 3/8 inch outer diameter and is compatible with push-fit fittings. The fitting material is brass and fiberglass-reinforced nylon; confirm chemical compatibility with the media in your system. Ensure you need a tee configuration rather than a straight connector or elbow for the planned layout.

Highlights

  • Quick push-to-connect assembly speeds up installation
  • Three 3/8 in ports join lines in a single tee
  • Brass and glass-filled nylon body resists corrosion
  • Pack of ten fittings covers multiple connection points
  • Black colour matches standard pneumatic tubing systems

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3104 60 00

Questions about this item

How do I confirm the Legris 3104 union tee is sealing correctly after installation?

Pressurise the air line to working pressure and check all three 3/8 in push-to-connect ports for leaks; a bubble test with soapy water will reveal any escape at the brass and fibre-glass reinforced nylon body.

What comes in the PK10 pack and what extra items are needed to complete a connection?

The box contains ten black 3104 60 00 union tees with 3/8 in tube outer diameter on every port; no thread sealant is pre-applied, so have suitable tubing and a tube cutter ready for the push-fit joints.

Which Legris 3104 variant should I choose if I need a different tube size or pack quantity?

The listed model 3104 60 00 is the 3/8 in nylon tee sold in a pack of ten; other diameters or pack sizes carry different part numbers and are not covered by this listing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.