Legris
Legris 3104 14 00 Union Tee 14mm PK10
Connects three 14 mm tubes with push-fit brass and reinforced nylon tees in a pack of ten
- TypeDrain Components
- MaterialHAWA
- ColorBlack
- Push-to-connect design enables tool-free installation
- Three 14 mm ports suit equal-diameter tubing
- Brass and fibre-reinforced nylon body resists corrosion
- Black finish matches standard pneumatic systems
- Pack of 10 fittings covers multiple connection points
14 mm Push-Fit Union Tee
The Legris 3104 union tee connects three 14 mm tubes in a T configuration. Push-to-connect ports on all three ends allow tool-free assembly. The body combines brass with fibre-glass-reinforced nylon and comes in black. Supplied as a pack of 10.
Pneumatic systems using 14 mm OD tubing
Suits installers building or repairing compressed-air circuits that require a branch at 14 mm. Not intended for hydraulic or high-pressure liquid lines. Builders needing different tube diameters or thread ports should select another fitting.
Push-to-connect installation
Push each tube firmly into the port until it seats; no spanners or sealant are required. The collet grips automatically. A common error is insufficient insertion depth, which can cause leaks or tube blow-off under pressure.
Highlights
- Push-to-connect design enables tool-free installation
- Three 14 mm ports suit equal-diameter tubing
- Brass and fibre-reinforced nylon body resists corrosion
- Black finish matches standard pneumatic systems
- Pack of 10 fittings covers multiple connection points
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Color | Black |
| Brand | Legris |
| Model | 3104 14 00 |
Questions about this item
What tube outer diameter must I have for all three ports of this 3104 union tee to connect?
Each of the three push-to-connect ports accepts a 14 mm outer-diameter tube, so you need 14 mm tubing on every branch.
Will this black HAWA tee work with existing brass push-fit fittings I already have in 14 mm?
Yes, the brass and fiberglass-reinforced nylon body is designed for standard 14 mm push-to-connect systems, so it mates with compatible brass fittings of the same size.
How can I confirm the tee is sealed correctly after I push the tubes in?
Pull gently on each inserted tube; a firm grip without movement shows the collet has locked and the O-ring is seated for a leak-free joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



