We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit tee fitting with 6mm tube connection

Legris

Legris 3103 06 11 Push-Fit Tee Fitting 6mm Trap

SKU CH-DDHW-RTJVZ MPN 3103

Push-fit tee connects 6 mm tube to two male threads, rated 290 psi at 175 °F with pre-applied sealant

  • TypeDrain Components
  • ColorBlack
  • Push-fit tee connects 6 mm tube without tools
  • Fiberglass-reinforced nylon withstands 290 psi working pressure
  • Rated to 175 °F for hot-fluid lines
  • Pre-applied thread sealant speeds MNPT installation
  • Compact 1 1/32 in length fits tight spaces

Fitting type and application

The Legris 3103 06 11 is a push-fit tee fitting designed for 6 mm tube outer diameter. It connects one push-to-connect port with two male NPT threads for air, cutting fluids and inert gases. The body is fiberglass-reinforced nylon in black.

Suitability and limits

This fitting suits installers who need a compact branch with pre-applied thread sealant on the male threads. It is rated for 290 psi and 175 Degrees F maximum operating conditions. Buyers who require a different tube size, an all-push-connect layout or higher pressure and temperature ratings should look at other fittings.

Deciding specification

The critical specification is the 6 mm tube outer diameter on the push-to-connect side combined with male NPT threads on the other two ports. Matching this exact combination to your tubing and threaded ports determines whether the part fits the circuit.

Highlights

  • Push-fit tee connects 6 mm tube without tools
  • Fiberglass-reinforced nylon withstands 290 psi working pressure
  • Rated to 175 °F for hot-fluid lines
  • Pre-applied thread sealant speeds MNPT installation
  • Compact 1 1/32 in length fits tight spaces

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3103 06 11

Questions about this item

What 6 mm tubing do I need ready for the push-to-connect port?

Have 6 mm outside-diameter tubing cut square and deburred; the push-to-connect side B grips it without tools.

Will the 290 psi rating and 175 °F limit handle the compressed-air lines I already run?

Yes, the fiberglass-reinforced nylon body and pre-applied sealant are rated for 290 psi and 175 °F, matching typical shop air systems.

How can I confirm the tee is sealed after I push the tube in?

Pull the tube gently — it should not release — then pressurise the line to 290 psi and check for bubbles at all three ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.