We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black push-fit elbow fittings in a pack

Legris

Legris 3102 60 56 Union Elbow 3/8 x 1/4 in PK10

SKU CH-75XV-9BKHP MPN 3102

Pack of ten push-fit elbow fittings joining 3/8 in and 1/4 in tubing, rated to 290 psi and 176 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds up pneumatic installations
  • Reduces tube sizes from 3/8 in to 1/4 in
  • Fiberglass-reinforced nylon withstands 290 psi operating pressure
  • Rated for temperatures up to 176 Degrees F
  • Pack of 10 elbows covers multiple connection points

Union Elbow 3/8 x 1/4 Inch Pack of 10

The Legris 3102 60 56 is a push-fit elbow fitting designed to connect 3/8 inch and 1/4 inch tubing in air systems. It suits technicians assembling pneumatic circuits who need a compact, tool-free joint. The black fiberglass-reinforced nylon body resists corrosion in workshop environments.

Sustained Pressure and Temperature Performance

Rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 176 Degrees F, the fitting maintains seal integrity under continuous load. The push-to-connect ends on both sides grip tubing securely without thread sealant. Glass-filled nylon construction resists creep during prolonged pressurised service.

Dual-Diameter Push-Fit Connection

The defining specification is the combination of a 3/8 inch tube outer diameter on side A and a 1/4 inch tube outer diameter on side B in a single elbow. This reduces fitting count when transitioning between line sizes. Builders needing identical diameters on both ports cannot use this part.

Highlights

  • Push-to-connect design speeds up pneumatic installations
  • Reduces tube sizes from 3/8 in to 1/4 in
  • Fiberglass-reinforced nylon withstands 290 psi operating pressure
  • Rated for temperatures up to 176 Degrees F
  • Pack of 10 elbows covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3102 60 56

Questions about this item

Will the fiberglass-reinforced nylon body stay cool enough when the system runs at 176 degrees Fahrenheit all day?

The fitting is rated for continuous operation up to 176 degrees Fahrenheit and 290 psi, so it handles full-day heat without softening or leaking.

Do I need any thread tape or sealant to install the push-to-connect ends on 3/8-inch and 1/4-inch tubing?

No sealant or tape is required; the push-to-connect design seals automatically on clean-cut nylon or polyurethane tube.

Can I mix this elbow with older brass push-fit fittings that use the same 3/8-inch and 1/4-inch tube sizes?

Yes, the 3/8-inch and 1/4-inch push-to-connect ports follow the same tube-OD standard, so they interoperate with legacy brass bodies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.