We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black push-fit elbow fittings in a row

Legris

Legris 3102 53 00 Push-Fit Elbow 1/8 in 290 PSI Black Pack 10

SKU CH-K884-YH2R2 MPN 3102

Pack of ten push-fit elbow fittings for 1/8 inch tubing rated to 290 psi and 176 °F

  • TypeDrain Components
  • Push-to-connect design speeds up air-line assembly
  • 290 psi rating handles demanding pneumatic systems
  • Fiberglass-reinforced nylon body resists impact and chemicals
  • Compact 23/32 in length fits tight routing spaces
  • Pack of ten fittings covers multiple connection points

1/8" Push-Fit Elbow Pack 10

This Legris 3102 pack contains ten black push-fit elbow fittings for 1/8 inch tubing. They connect two tubes of equal diameter using a simple push-to-connect design. The fiberglass-reinforced nylon body handles air applications up to 290 psi and 176 degrees Fahrenheit. No thread sealant is included or required for the push-fit ends.

Suits Simple Air Lines, Not Threaded Ports

Builders assembling pneumatic circuits with 1/8 inch push-fit tubing will find these elbows match the spec. Installers needing threaded connections, different tube sizes, or higher temperature ratings should look at alternative fitting types. The pack quantity of ten suits small projects or spares but may not cover large installations.

290 PSI Maximum Operating Pressure

The 290 psi pressure rating is the single figure that decides if this elbow fits the system. Verify the circuit pressure stays below this limit before installing. The 176 degrees Fahrenheit temperature ceiling and 23/32 inch overall length are fixed by the same design.

Highlights

  • Push-to-connect design speeds up air-line assembly
  • 290 psi rating handles demanding pneumatic systems
  • Fiberglass-reinforced nylon body resists impact and chemicals
  • Compact 23/32 in length fits tight routing spaces
  • Pack of ten fittings covers multiple connection points

Specifications

TypeDrain Components
BrandLegris
Model3102 53 00

Questions about this item

Will the push-fit seals on the 3102 53 00 need periodic replacement under normal air-line service?

The fiberglass-reinforced nylon body and push-to-connect seals are designed for the full 290 psi rating; no scheduled seal replacement is required unless a leak appears.

What is the first limit reached when the fitting runs continuously at its 290 psi maximum?

The 176 Degrees F temperature ceiling is reached before the pressure rating, so sustained high-temperature air flow is the limiting factor.

Does the black 1/8 in elbow generate noticeable heat or noise when pressurised all day?

As a passive push-fit elbow with no moving parts, it produces no noise and negligible heat; only the compressed air temperature of up to 176 Degrees F is felt.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.