We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit elbow fitting, 16 mm tube size, 52 mm overall length

Legris

Legris 3102 16 00 Push-Fit Elbow Fitting 16mm

SKU CH-BPTJ-FMAR7 MPN 3102

Push-fit elbow connects 16 mm tubes at 90 degrees, rated to 290 psi and 176 °F

  • TypeDrain Components
  • Push-to-connect design enables quick, tool-free installation
  • 16 mm tube size on both ends matches standard pneumatic lines
  • Fiberglass-reinforced nylon body resists impact and vibration
  • 290 psi maximum operating pressure handles demanding air systems
  • 176 °F temperature rating suits high-heat environments

16 mm push-fit elbow for air lines

The Legris 3102 16 00 connects two 16 mm tubes at a right angle using push-to-connect ends. It is built from black fiberglass-reinforced nylon for pneumatic plumbing in automotive or workshop systems. The fitting installs without tools and suits technicians who need a quick, reliable corner joint. It is not for buyers who need a threaded connection or a different tube diameter.

Thermals noise and power draw

As a passive plastic fitting it generates no heat, makes no sound and draws no power during normal use. The material withstands up to 176 degrees Fahrenheit and 290 psi, so it remains stable in typical compressed-air circuits. No fan, pump or electrical supply is involved, leaving the surrounding equipment unaffected.

16 mm tube size decides fit

The single specification that determines compatibility is the 16 mm outer diameter on both push-fit ports. If your tubing matches that size the elbow will seat correctly; if the tubing is larger or smaller the part cannot be used.

Highlights

  • Push-to-connect design enables quick, tool-free installation
  • 16 mm tube size on both ends matches standard pneumatic lines
  • Fiberglass-reinforced nylon body resists impact and vibration
  • 290 psi maximum operating pressure handles demanding air systems
  • 176 °F temperature rating suits high-heat environments

Specifications

TypeDrain Components
BrandLegris
Model3102 16 00

Questions about this item

How do I install the 16 mm push-fit elbow and what step is often missed?

Cut the tube square, deburr the end, then push it firmly into each 16 mm port until it bottoms out; the step people skip is checking the insertion depth mark to confirm a full seat.

What maintenance or replacement will the fiberglass-reinforced nylon fitting need over time?

Inspect the O-ring seals periodically for hardening or cracking; replace the fitting if the black body shows stress-whitening or if leaks appear at the 290 psi rating limit.

Which limit appears first during continuous use at the 176 °F maximum temperature?

The 290 psi pressure rating derates as temperature climbs, so sustained operation near 176 °F will hit the reduced pressure ceiling before the material reaches its thermal limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.