We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass push-fit adapter fittings, 8mm tube, silver finish

Legris

Legris 3101 08 67 Push-Fit Adapter Fitting 8mm 10 PK

SKU CH-SHQM-YQST6 MPN 3101

Pack of ten brass push-fit adapters joining 8 mm tube to 12 mm male metric thread, rated to 290 psi and 175 °F

  • TypeDrain Components
  • Push-to-connect design speeds installation on 8 mm tube
  • Brass body withstands 290 psi working pressure
  • Rated to 175 °F for demanding fluid lines
  • Male metric 12 mm thread fits standard ports
  • Pack of 10 fittings covers multiple connections

Brass push-fit adapter for 8 mm tube

This brass adapter connects 8 mm tubing to a 12 mm male metric thread using a push-to-connect design. It comes in a pack of ten and is rated for 290 psi at up to 175 degrees F. Pre-applied thread sealant is not included.

Suits vacuum lines needing a straight metric join

Installers working with 8 mm tube and a 12 mm male port can use this fitting without tools. It is not for systems that require a different tube diameter, a female thread, or a higher pressure rating than 290 psi.

8 mm tube to 12 mm male metric thread

The fitting accepts an 8 mm outer-diameter tube on the push-fit side and mates with a 12 mm male metric thread on the other. This single interface match determines whether the part fits the application.

Highlights

  • Push-to-connect design speeds installation on 8 mm tube
  • Brass body withstands 290 psi working pressure
  • Rated to 175 °F for demanding fluid lines
  • Male metric 12 mm thread fits standard ports
  • Pack of 10 fittings covers multiple connections

Specifications

TypeDrain Components
BrandLegris
Model3101 08 67

Questions about this item

Will the 8 mm push-to-connect end seal onto the 8 mm tubing I already have?

Yes — Side A is an 8 mm push-to-connect port designed for 8 mm tube outer diameter, so your existing tubing fits directly.

How can I confirm the 290 psi rating is holding after installation?

Pressurise the line to your working pressure, then brush soapy water on the 12 mm male thread and the 8 mm push-fit joint; no bubbles means the seal is sound.

Does the 10-pack include thread sealant or must I buy it separately?

The fittings come without pre-applied thread sealant, so you will need to supply your own sealant for the 12 mm male metric threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.