We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit connector 8 mm tube to 10 mm male thread silver finish

Legris

Legris 3101 08 60 Male Connector 8mm x 10mm trap

SKU CH-P0PS-EZH54 MPN 3101

Connects an 8 mm tube to a 10 mm male thread with a 290 psi pressure rating

  • TypeDrain Components
  • MaterialHAWA
  • Push-to-connect design speeds installation on 8 mm tube
  • Male metric M10 thread secures a leak-free 10 mm connection
  • Brass construction handles 290 psi maximum operating pressure
  • Rated to 175 °F for reliable high-temperature performance
  • Compact 21 mm overall length fits tight plumbing spaces

Male Connector 8 mm × 10 mm

This push-fit adapter joins an 8 mm tube to a 10 mm male metric thread. It is built from brass and rated for 290 psi at 175 °F. The fitting suits pneumatic or vacuum lines that need a compact, tool-free connection.

Installers needing a straight 8-to-10 mm transition

Technicians who require an elbow, tee or a different thread standard will not find those configurations here. The part is a single straight male connector, so systems needing bulkhead, female or larger-bore fittings must look elsewhere.

8 mm tube to 10 mm male metric thread

This specific push-to-connect / male-thread combination determines whether the fitting matches the port and tubing in your circuit. Verify both dimensions before ordering.

Highlights

  • Push-to-connect design speeds installation on 8 mm tube
  • Male metric M10 thread secures a leak-free 10 mm connection
  • Brass construction handles 290 psi maximum operating pressure
  • Rated to 175 °F for reliable high-temperature performance
  • Compact 21 mm overall length fits tight plumbing spaces

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3101 08 60

Questions about this item

Will the 8 mm push-to-connect side seal reliably on my existing 8 mm nylon tubing?

Yes, the push-to-connect end is designed for 8 mm tube outer diameter and rated to 290 psi at 175 °F.

How can I confirm the M10 male thread is sealing properly after installation?

Pressurise the system up to 290 psi and check the 10 mm male thread joint for leaks; the pre-applied sealant helps ensure a tight fit.

Does the pack of ten include any thread sealant or do I need to buy it separately?

The connectors come with pre-applied thread sealant, so no separate sealant purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.