We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass push-fit male connector, silver finish, 4 mm tube end, 1/4 inch BSPP thread

Legris

Legris 3101 04 13 Male Connector 4 mm OD 290 PSI

SKU CH-XED2-BH7YN MPN 3101

Connects 4 mm tubing to a 1/4 in. BSPP male thread with push-fit ease, rated for 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • Push-to-connect design speeds vacuum-line assembly
  • Brass construction resists corrosion in demanding environments
  • 290 psi rating handles high-pressure requirements
  • 175 °F maximum temperature suits heated systems
  • 4 mm tube OD fits standard metric tubing

4 mm Brass Push-Fit Adapter

This Legris 3101 04 13 fitting connects a 4 mm tube to a 1/4 inch MBSPP thread. It is designed for vacuum applications and rated to 290 psi at 175 Degrees F. The brass body measures 10 1/2 mm overall length. No thread sealant is pre-applied.

Plumbing and pneumatic installers

Suits technicians who need a straight male connector for 4 mm OD tubing on a 1/4 inch parallel port. Not for installers who require a female port, an elbow or a tee configuration. Buyers needing a different tube diameter or thread standard should select another fitting.

4 mm tube to 1/4 inch MBSPP

The push-to-connect end accepts 4 mm outer-diameter tube while the threaded end fits a 1/4 inch MBSPP port. This exact tube-to-thread combination is the single specification that determines whether the part fits the assembly.

Highlights

  • Push-to-connect design speeds vacuum-line assembly
  • Brass construction resists corrosion in demanding environments
  • 290 psi rating handles high-pressure requirements
  • 175 °F maximum temperature suits heated systems
  • 4 mm tube OD fits standard metric tubing

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3101 04 13

Questions about this item

How much heat can the brass fitting handle during continuous use?

The fitting is rated for a maximum operating temperature of 175 degrees Fahrenheit.

What tube size must I already have for the push-to-connect side to seal properly?

You need tubing with a 4 mm outer diameter for the push-to-connect connection.

Will the 1/4 inch BSPP thread mate with the older brass ports on my existing manifold?

Yes, the male thread is a 1/4 inch BSPP size designed for standard compatibility.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.