We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass-reinforced nylon push-fit elbow fitting with 1/4 inch tube connection

Legris

Legris 3009 56 11 Push-Fit Elbow Trap 1/4 in

SKU CH-446W-49FMR MPN 3009

Push-fit elbow fitting connects 1/4 in tube to 1/8 in FNPT thread, rated 290 psi at 175 °F

  • TypeDrain Components
  • ColorBlack
  • Push-fit elbow enables tool-free vacuum line connections
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated to 175 °F maximum temperature for demanding environments
  • 1/4 in tube to 1/8 in FNPT transitions vacuum systems efficiently
  • Pre-applied thread sealant not included — apply your preferred sealant

1/4 in Push-Fit Elbow Fitting

This push-fit elbow fitting connects a 1/4 in tube to a 1/8 in FNPT port. The body is made from fibre-reinforced nylon and is rated for 290 psi at 175 Degrees F. It is designed for vacuum applications. The fitting installs without tools.

Who this suits and who it does not

It suits installers who need a quick 90-degree connection between 1/4 in tubing and 1/8 in female threads. It does not suit systems that exceed the pressure or temperature limits. Buyers needing a different tube diameter or thread size should look elsewhere.

Key specification: 1/4 in tube to 1/8 in FNPT

The decisive specification is the combination of a 1/4 in push-to-connect end and a 1/8 in FNPT end. This pairing determines whether the fitting matches the tubing and port in your system. Verify both sizes before ordering.

Highlights

  • Push-fit elbow enables tool-free vacuum line connections
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated to 175 °F maximum temperature for demanding environments
  • 1/4 in tube to 1/8 in FNPT transitions vacuum systems efficiently
  • Pre-applied thread sealant not included — apply your preferred sealant

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3009 56 11

Questions about this item

What tube outer diameter and thread size does the Legris 3009 56 11 elbow accept?

The fitting connects a 1/4 in tube on the push-fit side to a 1/8 in FNPT thread on the other side.

How is the Legris 3009 56 11 installed, and what step is often missed?

Push the 1/4 in tube firmly into the push-fit end until it seats, then thread the 1/8 in FNPT side into the mating port using the pre-applied sealant; the common error is not pushing the tube past the internal collet.

When should the Legris 3009 56 11 be replaced?

Replace the fitting if it sees pressure above 290 psi or temperature above 175 Degrees F, or if the fiberglass-reinforced nylon body shows cracking or the sealant degrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.