We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting, pack of 10

Legris

Legris 3009 08 14 Female Elbow 1/4 NPT PK10

SKU CH-4VX2-RESM3 MPN 3009

Push-fit female elbow connects 5/16 inch tube to 1/4 NPT thread, rated for 290 psi and 175 degrees Fahrenheit

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit elbow connects 5/16 in tube to 1/4 in NPT thread
  • Pack of ten fittings speeds multi-point installations
  • Fiberglass-reinforced nylon body resists corrosion and vibration
  • Rated for 290 psi and 175 °F operating limits
  • Black finish identifies vacuum-line use at a glance

Push-Fit Elbow for Vacuum Lines

The Legris 3009 08 14 is a push-fit elbow fitting designed for vacuum applications. It connects a 5/16 inch outer diameter tube to a 1/4 inch FNPT thread using fiberglass-reinforced nylon construction. The pack contains ten black fittings suitable for automotive and plumbing drain systems. No thread sealant is pre-applied on the fittings.

Check Tube and Thread Compatibility

Verify that your existing tubing has a 5/16 inch outer diameter for the push-to-connect side. Ensure the mating port uses a 1/4 inch NPT female thread for the connection side. Confirm the system operates within a maximum pressure of 290 psi and a maximum temperature of 175 degrees Fahrenheit. Prepare thread sealant separately as none is included with the fittings.

Pressure and Temperature Limits

The fitting is rated for a maximum operating pressure of 290 psi in normal use. It withstands temperatures up to 175 degrees Fahrenheit without degradation. The fiberglass-reinforced nylon body resists corrosion and vibration in drain and vacuum environments. No moving parts or electrical components are present to generate noise or draw power.

Highlights

  • Push-fit elbow connects 5/16 in tube to 1/4 in NPT thread
  • Pack of ten fittings speeds multi-point installations
  • Fiberglass-reinforced nylon body resists corrosion and vibration
  • Rated for 290 psi and 175 °F operating limits
  • Black finish identifies vacuum-line use at a glance

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3009 08 14

Questions about this item

What comes in the pack and do I need any extra seals or tools?

The pack contains ten black female elbow fittings with push-to-connect on one side and 1/4 NPT threads on the other; no thread sealant is pre-applied, so you will need to supply your own sealant or tape.

How do I choose between the listed versions if I need a specific tube size?

This model 3009 08 14 is built for 5/16 inch tube outer diameter on the push-fit side and 1/4 inch NPT on the threaded side; select a different part number if your tube or thread size differs.

What does the 290 psi rating mean when the fitting is installed in a vacuum line?

The 290 psi maximum operating pressure is the upper limit for any fluid or gas service; in a vacuum application the same fitting handles full vacuum without leaking, provided temperature stays below 175 Degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.