We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory steel cover plate for 4000 series raceway, two-gang duplex receptacle, 4-3/4 in wide

Legrand

Legrand V4047BX Cover Plate Raceway 4000 Series 1;2 Channel

SKU CH-XPTE-7BK82

Steel cover plate for 4000 series raceway accepts 15A and 20A duplex receptacles plus 106 communications frame

  • Fits 4000 Series raceways with 7/8 in by 7/16 in dimensions
  • Steel construction provides durable protection for wiring installations
  • Supports 15A and 20A duplex receptacles for power connections
  • Accepts 106 communications duplex frame for data integration
  • Two-gang overlapping cover design simplifies device mounting

Raceway Cover Plate 4000 Series

This Legrand cover plate fits 4000 series raceways with a 7/8 in by 7/16 in cross-section. It provides a two-gang overlapping cover for 15A and 20A duplex receptacles and accepts a 106 communications duplex frame. The steel construction is unfinished and coloured ivory. It is intended for installers completing surface-mounted wiring runs.

Steel Build And Thermal Behaviour

The unfinished steel body dissipates heat from the enclosed conductors without added insulation. No moving parts or active cooling are present, so the plate adds no audible noise to the installation. Power draw is determined solely by the devices mounted behind the cover, not by the plate itself. The material meets RoHS requirements and carries UL file E41751.

Two-Gang Mounting And Daily Use

The 4 3/4 in width and 5 1/8 in square footprint covers two standard device boxes, simplifying alignment during fit-out. Overlapping edges hide cut-out imperfections for a cleaner finished appearance. The plate suits both power and low-voltage channels in the same raceway run. Installers should verify box spacing matches the fixed mounting centres before cutting the raceway.

Highlights

  • Fits 4000 Series raceways with 7/8 in by 7/16 in dimensions
  • Steel construction provides durable protection for wiring installations
  • Supports 15A and 20A duplex receptacles for power connections
  • Accepts 106 communications duplex frame for data integration
  • Two-gang overlapping cover design simplifies device mounting

Specifications

BrandLEGRAND

Questions about this item

How do I install the V4047BX cover plate onto the 4000 series raceway and what step is often missed?

Align the cover plate over the raceway base so the two-gang overlapping duplex openings match the mounted receptacles, then secure with the supplied screws. The step often missed is confirming the 15A and 20A duplex receptacles are fully seated before tightening the cover.

What maintenance or replacement will the V4047BX cover plate need over time?

The unfinished steel cover may show surface oxidation in damp environments; wipe it clean and apply a light corrosion inhibitor if discoloration appears. Replace the cover if it becomes bent, cracked, or no longer overlaps the duplex receptacles securely.

What is the first limit that appears when the V4047BX cover plate is used continuously in a high-traffic area?

The overlapping two-gang cover design can loosen under repeated plug insertion and removal, causing the screws to back out. Retighten the mounting screws periodically to maintain a flush fit against the raceway.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.