We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow industrial nylon locking plug with IP67 rating

Legrand

Legrand 26W08 Watertight Locking Straight Blade Plug 125/250V 20A IP67

SKU CH-VT1T-75994

Watertight locking straight-blade plug rated 125/250 V AC at 20 A with IP67 protection and corrosion-resistant nylon housing

  • MaterialHAWA
  • IP67 rated for dust and water immersion
  • Locking mechanism prevents accidental disconnection
  • 125/250 V AC dual-voltage flexibility
  • 20 A capacity supports industrial equipment
  • Nylon housing resists corrosion and impact

Industrial Watertight Plug 20A IP67

This Legrand straight blade plug is built for industrial environments where moisture and dust are constant hazards. It accepts three-wire cords from .300 to .625 inches in diameter and locks securely into matching receptacles. The nylon housing resists corrosion and meets IP67 ingress protection. Electricians and maintenance crews specify it for temporary power distribution on wet job sites.

Locking Design and Nylon Construction

The non-shrouded locking blades prevent accidental disconnection when cables are pulled or vibrated. Yellow nylon material provides visibility in low light and withstands repeated insertion cycles without cracking. The plug handles 125/250V AC at 20 amps across three poles and three wires. Its cord-grip range accommodates standard industrial cable sizes without adapters.

3-Phase L5-15P Configuration

This plug follows the L5-15P pinout for three-phase 20-amp service at 125/250 volts. It will not mate with single-phase or 15-amp receptacles, so verify the matching outlet before purchase. The IP67 rating guarantees protection against immersion up to one metre for thirty minutes. Buyers needing a different pole count or voltage rating must select another part number.

Highlights

  • IP67 rated for dust and water immersion
  • Locking mechanism prevents accidental disconnection
  • 125/250 V AC dual-voltage flexibility
  • 20 A capacity supports industrial equipment
  • Nylon housing resists corrosion and impact

Specifications

BrandLEGRAND
MaterialHAWA

Questions about this item

What voltage range does the 125/250V AC rating cover for the L5-15P interface?

The plug is rated for 125/250V AC and uses the L5-15P locking configuration, which is standard for 125V 15A circuits; the 250V rating applies to the device construction but the L5-15P blade pattern only fits 125V receptacles.

What cable diameter range does the cord grip accept for the 0.300 in to 0.625 in specification?

The cord grip accommodates cables from 0.300 in to 0.625 in outer diameter, so the jacket must fall within that window to seal to IP67.

How do you assemble the nylon housing to achieve the IP67 seal, and what step is commonly missed?

Insert the stripped conductors into the terminal screws, tighten to the specified torque, then thread the gland nut until the internal gasket compresses evenly around the cable; the step often missed is fully seating the gasket before final tightening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.