We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass PEX reducing tee with three barbed ends

Legend Valve

Legend Valve 460-236NL PEX reducing tee 2 x 2 x 1-1/2

SKU CH-FJXT-39X70

A no-lead DZR forged brass PEX reducing tee connects 2-inch and 1-1/2-inch tubing in potable water systems

  • No-lead brass protects water quality
  • DZR forged brass resists dezincification
  • Reducing tee joins 2 in, 2 in and 1-1/2 in PEX
  • Model 460-236NL for easy identification
  • Prop 65 notice included for California compliance

Product identity

This Legend Valve 460-236NL PEX reducing tee is a no-lead DZR forged brass fitting built for potable water distribution systems. It joins three PEX tubes in a tee configuration with two 2-inch ports and one 1-1/2-inch port.

Deciding specification

The fitting reduces from two 2-inch PEX connections down to a single 1-1/2-inch PEX connection in one forged brass body. This specific 2 x 2 x 1-1/2 sizing determines whether the tee matches the branch layout of your manifold or supply line.

Fit and alternatives

Installers who need a straight 2-inch tee or a different reduction ratio should select another model. Buyers requiring a fitting without Proposition 65 listed chemicals must choose a different product.

Highlights

  • No-lead brass protects water quality
  • DZR forged brass resists dezincification
  • Reducing tee joins 2 in, 2 in and 1-1/2 in PEX
  • Model 460-236NL for easy identification
  • Prop 65 notice included for California compliance

Specifications

BrandLEGEND VALVE

Questions about this item

What does the 460-236NL model number tell me about this fitting?

The 460-236NL is the manufacturer's part number for a 2" x 2" x 1-1/2" PEX reducing tee made from no-lead, dezincification-resistant forged brass.

Which standard governs the PEX connections on this tee?

The tee uses standard PEX sizing for 2-inch and 1-1/2-inch tubing, compatible with crimp, clamp, or expansion systems that match those dimensions.

What clearance do I need to install this 2-inch reducing tee?

The forged brass body requires enough space for the 2-inch PEX connections on the run and the 1-1/2-inch branch, plus tool access for your chosen connection method.

More in Manifolds & Valves

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.