Apollo
Apollo 6090301 globe valve 1/2 in FNPT brass 5000 psi 100 F
Brass globe valve with FNPT connections handles air, fluid and gas up to 5000 psi at 100 F
- TypeOther
- Rated for 5000 psi air pressure at 100 F
- Brass body and stem resist corrosion in fluid service
- Rising stem with cross handle shows open position clearly
- Hub bonnet design simplifies packing maintenance
- 1/2 in FNPT connections suit standard piping systems
Apollo 6090301 Globe Valve
The Apollo 6090301 is a brass globe valve with 1/2 inch FNPT connections designed for air, fluid and gas media. It suits installers needing a rising-stem valve with a cross handle for positive shut-off in general-purpose piping systems. The hub-style bonnet and brass stem provide durability in standard industrial and commercial applications.
Capacity and headroom
Rated for 5000 psi maximum fluid pressure and 5000 psig maximum air pressure at 100 degrees F, the valve handles high-pressure lines within this temperature ceiling. Steam service is not rated, so the valve must not be used in steam systems. The 100 degree F maximum fluid temperature limits use in elevated-heat processes or hot-water loops.
Build integration
The valve measures 2 3/4 inches inlet-to-outlet with 3 inches from the top of the handle to the inlet centre, requiring adequate clearance for the rising stem and cross handle operation. Brass body and stem suit standard thread-sealing methods for FNPT joints. Installers must verify system pressure and temperature stay within the stated limits before specifying this valve.
Highlights
- Rated for 5000 psi air pressure at 100 F
- Brass body and stem resist corrosion in fluid service
- Rising stem with cross handle shows open position clearly
- Hub bonnet design simplifies packing maintenance
- 1/2 in FNPT connections suit standard piping systems
Specifications
| Type | Other |
|---|---|
| Brand | APOLLO |
Questions about this item
Will the 5000 psi brass valve hold up on my older air lines rated for lower pressure?
The valve is rated for 5000 psig at 100 Degrees F, so the system pressure must not exceed the lowest-rated component in the line.
How can I verify the rising-stem valve is opening fully after installation?
The cross handle rises with the brass stem; when the handle stops moving upward the valve is fully open.
Does the 6090301 come with pipe sealant or do I need to supply thread tape for the FNPT connections?
Only the valve body is included; pipe sealant or thread tape for the FNPT ends must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



