We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three solder-cup ends in a T shape

Legend Valve

Legend Valve 450-275 Copper Reducing Tee 2 x 1-1/4 x 2

SKU CH-YTHB-G9NCG

Copper reducing tee connects 2-inch and 1-1/4-inch lines with sweat fittings

  • ColorTransparent
  • Size2" x 1-1/4" x 2"
  • TypePipes, Valves & Fittings
  • Connects three copper pipes with reducing branch
  • 2" x 1-1/4" x 2" copper construction resists corrosion
  • Sweat-joint ends suit standard plumbing installations
  • New Legend Valve fitting meets Prop 65 disclosure
  • Model 450-275 identifies exact size configuration

Copper Reducing Tee for Plumbing Systems

This copper reducing tee connects three pipe sections in a T configuration with a smaller centre branch. The fitting uses sweat connections on all three ends for permanent soldered joints in residential or commercial plumbing installations.

Suited for Installers Reducing a 2 Inch Line

Plumbers joining a 1-1/4 inch branch to a 2 inch main line will find the correct step-down dimensions here. The fitting does not serve applications requiring a different branch size, a threaded connection or a press-fit joining method.

Centre Branch Measures 1-1/4 Inches Inside Diameter

The reducing outlet is sized at 1-1/4 inches ID while both run ends measure 2 inches ID, determining whether this tee matches the pipe schedule. California Proposition 65 warnings apply to this product.

Highlights

  • Connects three copper pipes with reducing branch
  • 2" x 1-1/4" x 2" copper construction resists corrosion
  • Sweat-joint ends suit standard plumbing installations
  • New Legend Valve fitting meets Prop 65 disclosure
  • Model 450-275 identifies exact size configuration

Specifications

BrandLEGEND VALVE
ColorTransparent
Size2" x 1-1/4" x 2"
TypePipes, Valves & Fittings

Questions about this item

What is the maximum operating temperature before the copper tee deforms under sustained hot-water flow?

The copper construction handles typical residential hot-water temperatures without deformation; the fitting has no published maximum temperature limit.

Does the tee generate noise or heat when water runs through it continuously?

Copper fittings are passive components — they produce no noise, vibration or heat of their own during continuous flow.

What pipe and tools must I already have to install this reducing tee?

You need 2 in. and 1-1/4 in. copper tubing (ID) plus a propane or MAPP torch, lead-free solder, flux and emery cloth for sweat connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.