Legend Valve
Legend Valve 450-264 Copper Reducing Tee 2 x 1/2 x 2 bathware
Copper reducing tee connects 2-inch and half-inch pipes in a C x C x C configuration
- ColorTransparent
- Size2" x 1/2" x 2"
- TypePipes, Valves & Fittings
- Copper construction resists corrosion for durable plumbing connections
- Reducing tee joins 2", 1/2" and 2" pipes in one fitting
- Sweat-style ends create leak-free soldered joints
- Lead-free alloy meets California Proposition 65 safety requirements
- New condition ensures clean, factory-fresh surfaces for installation
Copper Reducing Tee 2 x 1/2 x 2
The Legend Valve 450-264 is a copper reducing tee designed for plumbing installations. It connects pipes of differing diameters in a single junction. The fitting uses a C x C x C configuration for sweat solder connections. This new bathware component is supplied by Legend Valve.
Suited for residential water supply lines
Installers joining a half-inch branch to a two-inch main line will find this tee appropriate. The transparent finish allows visual inspection of the joint after soldering. It is not for systems requiring a different branch size or a threaded connection type. Buyers needing alternative port dimensions should look at other fittings.
Reducing tee with 2 x 1/2 x 2 inch ID
The critical specification is the 2" x 1/2" x 2" inside diameter layout that defines which pipes fit. Outside dimensions measure 2-1/8" x 5/8" x 2-1/8". California Proposition 65 warnings apply for cancer and reproductive harm. Match these exact dimensions to your piping plan before purchase.
Highlights
- Copper construction resists corrosion for durable plumbing connections
- Reducing tee joins 2", 1/2" and 2" pipes in one fitting
- Sweat-style ends create leak-free soldered joints
- Lead-free alloy meets California Proposition 65 safety requirements
- New condition ensures clean, factory-fresh surfaces for installation
Specifications
| Brand | LEGEND VALVE |
|---|---|
| Color | Transparent |
| Size | 2" x 1/2" x 2" |
| Type | Pipes, Valves & Fittings |
Questions about this item
How do I verify the copper reducing tee is installed correctly?
Check that the 2-1/8" x 5/8" x 2-1/8" OD ends seat fully on the copper pipes and that soldered joints show a continuous fillet all round with no leaks under pressure.
What comes with the Legend Valve 450-264 tee and what must I supply?
The box contains only the copper reducing tee; you must provide compatible copper pipe, flux, solder and a torch for the C x C x C sweat connections.
Which size of this reducing tee should I select for a 2-inch main with a half-inch branch?
Choose the 2" x 1/2" x 2" ID version (2-1/8" x 5/8" x 2-1/8" OD) to match a 2-inch main line and a 1/2-inch branch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
