We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three polished solder ends

Legend Valve

Legend Valve 450-237 Copper Reducing Tee 1-1/4 x 1 x 3/4 bathware

SKU CH-4937-9NCCP

Copper reducing tee connects three pipe sizes in a C x C x C configuration

  • ColorTransparent
  • Size1-1/4" x 1" x 3/4"
  • TypePipes, Valves & Fittings
  • Copper construction resists corrosion for long service life
  • Reducing tee joins three pipe sizes in one fitting
  • C x C x C ends suit soldered copper connections
  • 1-1/4" x 1" x 3/4" ID fits standard plumbing runs
  • California Proposition 65 notice included for chemical awareness

Copper reducing tee for plumbing systems

This Legend Valve 450-237 copper reducing tee connects three pipes of different diameters in a single fitting. The sweat-style C x C x C connections join 1-1/4 inch, 1 inch and 3/4 inch nominal copper tubing. It is intended for installers who need a durable, lead-free junction in water supply lines.

Replaces separate couplings and bushings

Using one reducing tee eliminates the need for multiple straight couplings plus reducing bushings to step between the three sizes. The jump is worth it when a compact, leak-resistant transition is required at a branch point in new construction or remodel work.

Withstands continuous water pressure

The solid copper body resists corrosion and handles sustained pressure and thermal expansion in hot and cold water systems without degrading. The fitting meets applicable plumbing codes for potable water use and carries the Proposition 65 notice for listed chemicals.

Highlights

  • Copper construction resists corrosion for long service life
  • Reducing tee joins three pipe sizes in one fitting
  • C x C x C ends suit soldered copper connections
  • 1-1/4" x 1" x 3/4" ID fits standard plumbing runs
  • California Proposition 65 notice included for chemical awareness

Specifications

BrandLEGEND VALVE
ColorTransparent
Size1-1/4" x 1" x 3/4"
TypePipes, Valves & Fittings

Questions about this item

What pipe diameters does the 1-1/4 x 1 x 3/4 copper tee connect?

The tee joins 1-1/4", 1" and 3/4" copper tube (ID); outside diameters are 1-3/8", 1-1/8" and 7/8" respectively.

How is the tee joined and what step is often missed?

Clean each tube end and fitting socket, apply flux, assemble, then heat evenly with a torch until solder flows into all three joints — skipping flux or uneven heat causes leaks.

When should the tee be inspected or replaced?

Check for green corrosion, pinholes or drips at each joint during routine plumbing checks; replace the tee if any joint shows degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.