Legend Valve
Legend Valve 450-233 Copper Reducing Tee 1-1/4 x 3/4 x 3/4
Copper reducing tee connects 1-1/4 inch to two 3/4 inch lines for plumbing systems
- ColorTransparent
- Size1-1/4" x 3/4"
- TypePipes, Valves & Fittings
- Copper construction resists corrosion for long service life
- Reducing tee joins 1-1/4 in. and 3/4 in. lines in one fitting
- C x C x C sweat connections suit standard copper plumbing
- California Proposition 65 warning notes chemical hazard awareness
- Brand new fitting ready for immediate installation
Copper Reducing Tee for Plumbing
This Legend Valve copper reducing tee connects pipes of different diameters in a C x C x C sweat configuration. The fitting reduces from 1-1/4 inch to two 3/4 inch branches for water supply lines. It is a new component intended for residential or light commercial plumbing installations.
Solder Joint Installation Requirements
The tee uses copper-to-copper sweat connections that require flux, lead-free solder and a torch to form watertight joints. Installers must clean and flux each tube end before heating evenly around the fitting. California Proposition 65 warnings apply because the product contains chemicals known to cause cancer and reproductive harm.
1-1/4 x 3/4 x 3/4 Inch Sizing Determines Fit
The reducing tee is manufactured with 1-1/4 inch by 3/4 inch by 3/4 inch inside diameters and corresponding outside dimensions of 1-3/8 inch by 7/8 inch by 7/8 inch. Builders needing a straight coupling or a different reduction ratio cannot use this fitting and must select an alternative part.
Highlights
- Copper construction resists corrosion for long service life
- Reducing tee joins 1-1/4 in. and 3/4 in. lines in one fitting
- C x C x C sweat connections suit standard copper plumbing
- California Proposition 65 warning notes chemical hazard awareness
- Brand new fitting ready for immediate installation
Specifications
| Brand | LEGEND VALVE |
|---|---|
| Color | Transparent |
| Size | 1-1/4" x 3/4" |
| Type | Pipes, Valves & Fittings |
Questions about this item
How do I know which copper reducing tee size matches my pipe layout?
The 450-233 model provides a 1-1/4" x 3/4" x 3/4" ID configuration with 1-3/8" x 7/8" x 7/8" OD, so match those exact dimensions to your existing copper lines.
What does the 1-1/4" x 3/4" x 3/4" ID measurement mean once the tee is soldered in place?
It indicates the inside diameter of each port, giving you a 1-1/4 inch main run and two 3/4 inch branches for consistent flow through the copper fitting.
Is this a C x C x C sweat fitting and what does that cap in practice?
Yes, all three ports are copper sweat connections, so the joint is limited to standard soldering temperature and the pressure rating of the copper pipe you join it to.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
