Legend Valve
Legend Valve 352-284 1-1/2 x 1 x 1-1/2 galvanized reducing tee bathware
A galvanised reducing tee with 1-1/2, 1 and 1-1/2 inch female NPT outlets for joining pipes of different sizes
- ColorTransparent
- Size1-1/2 x 1 x 1-1/2
- TypePipes, Valves & Fittings
- Galvanised steel construction resists corrosion for durable plumbing installations
- Reducing tee design connects 1-1/2 inch, 1 inch and 1-1/2 inch pipes in one fitting
- Female NPT threads on all three ports allow direct connection to standard threaded pipe
- Legend Valve brand manufacturing ensures consistent quality for bathware applications
- California Proposition 65 warning indicates presence of regulated chemicals requiring safe handling
Galvanised Reducing Tee
This galvanised reducing tee connects three female NPT threads in a 1-1/2 by 1 by 1-1/2 inch arrangement. It suits plumbers and DIY installers joining different pipe diameters in water supply or heating systems. The galvanised coating resists corrosion in typical domestic installations. Condition is new and the part ships directly from the manufacturer.
Flow Capacity and Limits
The 1 inch centre branch reduces flow compared with the 1-1/2 inch ends, so it handles standard residential hot and cold lines comfortably. It runs out of capacity on high-demand commercial loops or where full-bore 1-1/2 inch flow is required throughout. California Proposition 65 warnings note chemicals known to cause cancer and reproductive harm.
Included Fitting Only
The box contains the single reducing tee with no sealant, tape or additional couplings. Installers must supply thread sealant or PTFE tape to ensure watertight joints. No software or electronic accessories are relevant for this mechanical fitting. Orders of $75 or more qualify for free shipping from the supplier.
Highlights
- Galvanised steel construction resists corrosion for durable plumbing installations
- Reducing tee design connects 1-1/2 inch, 1 inch and 1-1/2 inch pipes in one fitting
- Female NPT threads on all three ports allow direct connection to standard threaded pipe
- Legend Valve brand manufacturing ensures consistent quality for bathware applications
- California Proposition 65 warning indicates presence of regulated chemicals requiring safe handling
Specifications
| Brand | LEGEND VALVE |
|---|---|
| Color | Transparent |
| Size | 1-1/2 x 1 x 1-1/2 |
| Type | Pipes, Valves & Fittings |
Questions about this item
Will the 352-284 galvanized tee thread onto my existing 1-1/2" and 1" NPT pipes without leaks?
The tee uses FNPT threads on all three ports, so it mates with standard 1-1/2" and 1" male NPT fittings you already have. Apply thread sealant rated for galvanized steel to ensure a watertight joint.
How can I confirm the 352-284 reducing tee is seated correctly after installation?
Pressurize the line and check each of the three FNPT connections for drips; a properly sealed joint shows no moisture at the threads.
Does the 352-284 package include pipe dope or Teflon tape, or must I buy sealant separately?
The box contains only the galvanized reducing tee; thread sealant or tape is not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
